When a monitoring center is configured, Dealer Admin enables you to place a system on test and take it off test. To initiate a test, complete the following steps.

Contents

Place a System on Test

  1. Go to Customers.
  2. Select the system name.
  3. In the menu, go to System Status.
  4. Select Place System on Test, then select a duration.
    WARNING: For the number of hours that you specify, the system will send signals to the monitoring center but emergency services will not be contacted.
  5. To start the test, select Confirm.

Take a System off Test

  1. Go to Customers.
  2. Select the system name.
  3. In the menu, go to System Status.
  4. Select Take System off Test.

© Digital Monitoring Products, Inc.