You can enable auto arming and disarming as well as closing checks for schedules on a system from Dealer Admin. These settings apply to every schedule on the system. To configure area settings, complete the following steps.

  1. Go to Customers.
  2. Select the system name.
  3. In the menu, go to Schedules.
  4. Select Area Settings.
  5. If you want a reminder when the system is not armed on time, select Closing Check.
  6. Select Auto Arm or Auto Disarm to enable auto arming or disarming for specific areas.
  7. Select Save.

© Digital Monitoring Products, Inc.