High Availability Configuration

To enable High Availability:

1. Login to the Akkadian Appliance Manager on the node you intend to be your initial Primary(Master) using:

Username	akkadianuser
Password	akkadianpassword

*Note* configurations will be applied to secondary nodes automatically

2. Select Option 6 High Availability
3. Select Option 1 – Enable High Availability

4. Enter the Secondary Hostname, Virtual IP, and Virtual IP Mask
5. Choose a *Cluster Password and Repeat for confirmation*
6. Enter “y” to save changes and Enable High Availability

*Note* High Availability and Database replication configuration status takes about around 2 minutes before its reflected on the CLI

From the main Appliance Manager menu, you will see High Availability is Enabled

Copyright and Trademarks:

I. Copyright:

This website and its content is copyright © 2018 Akkadian, LLC. All rights reserved. Except with the prior written permission of Akkadian, LLC, any redistribution or reproduction of part or all of the contents of this website, including the redistribution or reproduction of any documentation or other materials downloaded from this website, in any form and in any media, is prohibited.

II. Trademarks:
Akkadian, the Akkadian logo and other trademark or service marks used on this website, whether registered or not, are the property of Akkadian, LLC and may not be used or reproduced without the prior written permission of Akkadian, LLC.

aPME UG 1/8/2018 0001 © http://www.akkadianlabs.com/apme/