Accu-Chek
To connect your Accu-Chek pump please follow this steps:
Go to Settings
Tap Pump
Select Accu-Chek and tap Start Pairing
Android system window appears, you need to confirm your phone to be visible via bluetooth.
Tap Allow.
At this step you need to prepare your Accu-Chek Spirit Combo pump to pair with AI APS.
Go to Bluetooth settings on your pump, check there is no active connection and start pairing.
Both devices will start searching for each other. This process may take up to 60 seconds.
When your pump will find you phone you need to confirm pairing on your pump.
PIN-code.
You need to close Android system window if it appears and enter PIN-code from your pump’s screen only in AI APS window! and press confirm.
AI APS window. Enter PIN-code here.  |
Android window. Close/Cancel it.  |
Congratulations!
You’ve successfully connected your Accu-Chek Spirit Combo pump!
In case you have some problems with pairing your pump – please watch the full connection process video below:
