6.6.1. “Monitoring” section

There are two buttons in this section:

• “Start, Stop” – use this button to activate and deactivate the “Monitoring” module, whose task is to identify numbers during the “Live” session. When the module is active, the font color of the button activating it will change to light green. This module works closely with the roulette table map created by the “Mapper” module and the “Monitoring” section of the “Modus Operandi” module. In the description of the “Mapper” and “Modus operandi” modules, we explained step by step the principle of operation of the “Monitoring” module.
  

*From version 1.0.5, after disabling the “Monitoring” function, a countdown will take place from 5 to 0, the effect of which will be visible on the “Monitoring” button. This pause is necessary to reset all clocks participating in the “Live” session. “Monitoring” can be restarted right after the five-second countdown.

• “Exit” use this button to start the procedure ending the “Live” session. We will be asked: “Are you sure you want to end the Live session?” At this point, we can cancel the session ending procedure and, by confirming, the session will end.

*Ending the “Live” session does not mean its reset – (erasing).