• Attack – this button enables or disables a manual attack of a given number. After attacking one of the numbers, the platform starts calculating the points scored or lost for that number and passes this data to the group to which that number belongs and marks the number in the system as a number ready for betting. We can observe the sum of the attacks of the numbers on the chart of the group to which these numbers belong. How many points we have gained by attacking a given number can be checked in the information section on the “Profit-tokens” panel in the numbers windows. All number windows in the upper left corner contain information with the number of the group to which they belong. An active attack unblocks the “Stop loss” and “Trailing stop” functions, the operation of which is described below. After activating the function, the font color on the button will change to light green, and the attack marker will appear on the graph as the background changes to green. It must be remembered that a manual attack deactivates the automatic attacking machine semi-automatically (Auto), automatic strategy, “Target” or “AAL”, if they were active and vice versa – (except for “AAL”, which function can be activated during the attack and it will then have character that deactivates the attack).


  • Auto – this button activates or deactivates the automatic attacker on the given number. This function works in conjunction with the numeric field next to the “Auto” button, the value of which can be changed by the arrows on its side. When you click the up or down arrows, the value of the numeric field changes by one point, and when you hold down the Ctrl key on the keyboard, the value of the field changes by 25 points. The minimum value is 1 and the maximum is 99 points. The operation of this function is as follows: When there is even a slight upward movement in the graph, this function will automatically launch an attack on the given number and will go into standby mode when the value of the graph drops from the attack point minus the number of points set in the numeric field. After the number is attacked by the automatic attacker, the “Stop loss” and “Trailing stop” functions will be unblocked, the operation of which is described below. After enabling the function, the font color on the button will change to green, and the graph background will change to red. During the attack and its deactivation, the machine will display markers on the chart. You must remember that automatic attack runs continuously until disabled, and that this feature deactivates Manual Attack, Automatic Strategy, “Target” or “AAL” if they were active, and vice versa.


  • PP – use this button to activate or deactivate the “PP-Position protector” function, which, similarly to the “Trailing stop” function, is to protect against falling below a certain level, the “PP” function this differs from the “Trailing Stop” in that it follows the maximum in the graph after attacking at a fixed distance of 35 points and only until it reaches the level at which we attacked and stays there. The function must be activated before an attack takes place. It can be used in conjunction with a manual attack, automatic attacker, “Target” or “AAL”. We can only use “PP” for numbers and groups. After starting the function, the font color on the button will change to green, and a marker with a horizontal line marking the protection point will appear on the graph.


  • AAL – This button enables or disables the “AAL Active Average Line” function, which is used to activate a manual attack or deactivate a manual attack or an attacker’s automaton at the moment when the graph curve is crossed by the selected average.. It works as follows: When the function is started, the system checks if the average is above or below the plot curve. If the mean is above the graph, an attack or inactivation will be triggered when the mean line crosses the curve from above, and if the mean line is below the curve, an attack or inactivation will be triggered when the mean line crosses the curve from below. If the function is triggered in the middle of an attack, crossing the mean line with the graph deactivates the attack, otherwise activates it. The function works when there is only one mean line in the chart. Performing more averages deactivates the “AAL” feature, as does manual attack (the feature can be restarted after an attack), semi-automatic (automatic) attack, strategy, or “target”. After starting the function, the font color on the button will change to green, and the “Active” marker will appear on the graph next to the mean line. Medium lines are activated by buttons 1-6 on the keyboard, previously left-clicking on the graph of a given window in order to activate it. We have the following medium lines:
  • Average of the last 100 spins
  • Average of the last 250 spins
  • Average of the last 500 spins
  • Average of the last 1000 spins
  • Average of the last 2000 spins
  • Average of the last 5,000 spins



  • Strategy – with this button you activate or deactivate the automatic mode of attacking numbers, if the selected strategy for a given session is different than manual (ManualGame). We always choose the strategy at the beginning of the session (obligatory), but you can also change it to another one during the session by clicking the “Strategies” button in the main window of the platform. A launched strategy is activated on all numbers, but at any time we can disable the strategy on individual numbers, e.g. attack a specific number with a manual attack. After enabling the function, the font color on the button will change to green, and the graph background will be green or red. It depends on whether the number is under attack or waiting for a signal. Note that activating this feature deactivates Manual Attack, Auto Attacker (Auto), “Target” or “AAL” if they were active and vice versa (except for “AAL” and “Target” which cannot be triggered during an active auto strategy) . The automatic strategy also blocks the manual activation of the “PP”, “Trailing stop”, “Stop loss” functions and the switching on and off of the average lines if the automatic strategy is based on one of them – (AutoA Average500, AutoA Average2000, AutoA Average5000).



  • Zoom In, Out – use this button to switch the chart to displaying the last N chart records. The settings of the number of records for charts are in the basic settings of the platform – (zoom settings). The medium lines will not be visible when the mode is activated.. To exit the mode, click the “Zoom Out” button again. After starting the function, the font color on the button will change to green, and the information with the number of records currently displayed will appear on the graph. We can also zoom in the area of interest to us by holding down the left mouse button and drawing the zoom range from left to right and vice versa to cancel the zoom. Since version 1.0.3.2 there is a keyboard shortcut “F2” that activates the zoom function on the charts of numbers, groups and series.


  • Stop loss – use this button to activate or deactivate the function that protects against falling below the level specified by the user. This means that if the chart curve crosses the “Stop loss” level, the attack will end immediately. This function works in conjunction with the arrows next to the “Stop loss” button. By clicking the up or down arrows, the value of “Stop loss” is changed by one point, and with the Ctrl key held down on the keyboard, the value changes by 25 points. The minimum value is 1 and the maximum is 9999 points. This feature is available only during an active attack. After starting the function, the font color on the button will change to green, and a marker with a horizontal line marking the protection point will appear on the graph. It should be remembered that activating the “Stop loss” function deactivates the “Trailing stop” function if it was active and vice versa.


  • Trailing – with this button we activate or deactivate the “Trailing stop” function, which, like the “Stop loss” function, is a protection against falling below a certain level, the “Trailing stop” function differs from the “Stop loss” function in that it constantly follows the maximum on the chart – (it is about maxima created after the attack), within the distance set by the user. If the curve crosses the “Trailing stop” level, the attack will end immediately, as in the case of the “Stop loss” function. This function works in conjunction with the arrows next to the “Trailing” button. By clicking the up or down arrows, the “Trailing” value changes by one point, and while holding down the Ctrl key on the keyboard, the value changes by 25 points. The minimum value is 1 and the maximum is 9999 points. This feature is only available during an active attack. After enabling the function, the font color on the button will change to green, and a marker with a horizontal line marking the protection point will appear on the graph. Please note that activating the “Trailing stop” function deactivates the “Stop loss” function, if it was active and vice versa.


  • Target – with this button you can activate or deactivate the “Target” function, whose task is to automatically trigger a manual attack when the plot line reaches the “target” point set by the user on the plot. The function level can only be selected below the current plot curve level. This feature works in conjunction with the arrows next to the Target button. By clicking the up or down arrows, the value of the “Target” changes by one point, and while holding down the Ctrl key on the keyboard, the value changes by 25 points. The minimum value is 1 and the maximum is 9999 points. After enabling the feature, the font color on the button will change to green and a marker with a horizontal line will appear on the graph, indicating the point of attack. Note that activating this feature deactivates Manual Attack, Automatic Attack (Auto), Automatic Strategy or “AAL” if active and vice versa.
Revision: 9

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment