The field labeled Correction Procedure is where you specify the Correction Procedure that you wish to use. You have two options. You can select the* Default* setting from the drop-down or you can select the Custom setting.
If you select Default from the drop-down, the following procedure will appear in the text box and on this section of the procedure sheet available on the iPad:
“If incorrect response or no response – provide neutral response (no eye contact, remove any materials); repeat trial at next most intrusive prompt; if incorrect again, use most intrusive prompt; provide neutral statement”
If you select Custom from the drop-down, you will see a field called Custom Correction Procedure. This is a text box and you can enter the correction procedure you wish staff to follow.
Post your comment on this topic.