Parameters

The automatically created plan always follows the set constraints and assumptions.
Some of these assumptions can be easily changed in the cockpit by pressing the “Equalizer” button.

Basic

• Speed factor – Acceleration (> 100) or deceleration (<100) of the road network, i.e. shortening or extending the driving time. Applies to all used vehicles.
• Depot factor – Accelerate or slow down the loading of vehicles in the depot.
• Customer Factor – Accelerate or slow down unloading time for all vehicles. It does not apply to the customer’s administrative time
• Weight utilization – Allow vehicle overload (> 100) or create reserve (<100).
• Volume utilization – Allow vehicle overload (> 100) or create reserve (<100).
• Third utilization – – Allow capacity to be exceeded in the third dimension.
• Search depth – Adjusts the depth of the scan.

Advanced

• Maximum routes per vehicle – Maximum allowed number of routes for all vehicles.
• Maximum stops per route – Maximum number of stops per route.
• Maximum km per vehicle – maximum mileage for the vehicle.
• Maximum km per route – maximum mileage for the route
• Maximum route duration – The longest possible route duration (time).
• Include first leg – Include first section (depot -> first stop) to the duration of the route.
• Include last leg – Include the last section (last stop -> depot) to the duration of the route.
• Check depot capacity – Set whether the depot capacity should be checked.
• Routes without violations – System will respect all maps violations and restrictions during routes optimization.

Time

• Time window from prolongation – Extends the start of all time windows by the specified value.
• Time window to prolongation – Extends the end of all time windows by the specified value.
• Departure time after time window allowed – Departure after the time window. The value “Yes” allows you to arrive at a customer in a time window, but the unloading may end after a time window.
• Depot opening time – The first time you can start the route.
• Depot closing time – The time of the latest end of the route.
• Admin time upon departure – This parameter allows you to set the fixed time that each vehicle spends before starting the route in the depot.
• Admin time upon arrival – This parameter allows you to set the fixed time that each vehicle spends at the end of the route in the depot.