Departure/Arrival location functionality

Functionality that makes it possible to automatically build routes, taking into account the driver’s home both before the route, if the driver doesn`t start from the depot and after the route the same.

Also, this functionality can be used for any location from which it is planned to start before the depot or arrive after (service station, refueling, etc.)

For correct operation it is necessary:

1. Add the location of the driver’s home in the appropriate tab (Locations – add)
2. Enter the location in the vehicle settings (Advanced – edit)
3. Use the checkboxes to indicate the need to arrive at the depot before the start and/or after the end of the route

It is possible to display columns with “Place of departure” and “Place of arrival” in the vehicles tab for convenience.

The specified settings will be displayed both in the table and on the route map during the planning: