This mode by default repeats the pattern across the hoop. Basically if a pattern is 10 Pixels wide it will repeat it 13 times on a hoop that has 130 LEDS.

This mode has 4 Options

1. Repeat Pattern Continuously (Default)
2. Offset pattern by number of pixels, Here you can choose to print Pattern and leave X number of LEDS off in between
3. Offset pattern by pattern size, This one allows to offset by number of Pattern Sizes, Example 10 Pixel pattern can be offset by 2x, creating 20 Pixels of LEDS off
4. Print Pattern number of times, This Option allows you to select how many times pattern should print on Hoop, example 3 times only

The Pixels that are by default turned off, you can select a color to fill them with. 9 colors are available to choose from.

Offset Continuous
Offset by No of Pixels
Offset Pattern Size
Offset Number Of Patterns

The result is as follow, when no in between Color has been selected.
Offset Pattern Effects

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.