Emulating a mobile device from the computer

This article will illustrate how to emulate a mobile device on a computer screen

This link is to a short video ilustrating the process below

1) Open Swiftcount on a computer screen then on the top window right click and select the option to duplicate the screen

2) On the new tab in the window itself right click and select the option to Inspect

3) Once on inspection mode you can select the type of device to emulate (i.e iPhone etc)

4) The final step is just to place the cursor at the end of the address line after user7.swiftcount.com and press enter or refresh the screen

5) The screen should redraw and can now be used as the mobile device can.