2.1.6 Assigning RFID Bands to Members

There are 2 ways you can assign an RFID band to a member in Surfguard

1. Manually enter the serial number of the RFID band into Surfguard.
2. Login to Surfguard on an NFC-enabled Android device and scan the band.
   

How to access the RFID field in Surfguard

• Go to find a member
• Next to the member listed click the Cog icon
• Select RFID Tag
  

In the image below the Surfguard User would be able to enter the serial number manually. Enter the serial number and click the + icon, repeat this process to add additional bands. Please ensure you click Save

In the image below:-

• the Surfguard User is adding a band using an NFC-enabled Android device. NOTE: Use NFC scanner is on
• has scanned a band that already belongs to a member, an option is available to relink the band to the new member.
  

In the image below:-

• the Surfguard User is adding a band using an NFC-enabled Android device. NOTE: Use NFC scanner is on
• You cannot reassign this band to the member selected in Surfguard as the band is currently assigned to a member who is not in an organisation to which the Surfguard User currently has access.