Performance Data

Pulse Gear Drive (PGD-IDC) 24V Internal Drive Control

Pulseroller Products / Pulse Gear Drive (PGD) 24V/48V / Performance Data /

Pulse Gear Drive (PGD / PGD-Ai) 24V

Performance Data
ECO Mode

All Models

Nominal Gear Ratio	Gearbox Stages	Actual Gear Ratio	Output Shaft Speed RPM		Torque N-M (in-lbs)
			Min	Max	*Rated*	*Starting*
91 ^!	3	9075/99	6.3	63.6	6.0	33.2
					53.1	293.8
67		605/9	8.5	86.7	4.4	24.4
					38.9	215.9
45		45	12.8	129	2.9	16.3
					25.7	144.3
33		33	17.4	176.3	2.1	12
					18.6	106.2
27		27	21.3	215.1	1.7	9.8
					15	86.7
18	2	55/3	31.4	317.3	1.2	6.6
					10.6	58.4
15		15	38.4	387.2	0.9	5.4
					8	47.8
11		11	52.4	528.9	0.7	4
					6.2	35.4
9		9	64.0	645.3	0.5	3.2
					4.4	28.3

Rated Current	Starting Current
2.5A	3.0A

Performance Data
BOOST & BOOST-8 Mode

All Models

Nominal Gear Ratio	Gearbox Stages	Actual Gear Ratio	Output Shaft Speed RPM		Torque N-M (in-lbs)
			Min	Max	*Rated*	BOOST Starting	BOOST-8 Starting
91 ^!	3	9075/99	6.3	46	10.9	43.3	49.2
					96.5	383.2	435.4
67		605/9	8.5	62.7	8.0	31.8	36.1
					70.8	281.4	319.5
45		45	12.8	93.3	5.4	21.3	24.3
					47.8	188.5	215.1
33		33	17.4	127.5	3.9	15.6	17.7
					34.5	138.1	156.6
27		27	21.3	155.5	3.2	12.8	14.5
					28.3	113.3	128.3
18	2	55/3	31.4	229.5	2.1	8.6	9.8
					18.6	76.1	86.7
15		15	38.4	280	1.8	7.1	8.1
					15.9	62.8	71.7
11		11	52.4	382.5	1.3	5.2	5.9
					11.5	46.0	52.2
9		9	64.0	466.6	1.0	4.2	4.8
					8.9	37.2	42.5

Rated Current	BOOST Starting Current	BOOST-8 Starting Current
3.5A	5.0A	8.0A

Torque Value Definitions

Rated Torque	Torque that can be delivered by the motor roller for continuous use without overheating in environmental temperature of 25ºC. Average torque of start/stop operation should not exceed this value.
Starting Torque	Peak value of the motor stall torque