Senergy-Ai 48V – 48.6 mm (1.9”) Diameter

Torque Value Definitions

The following definitions apply to the information in this section:

Rated Torque	Torque that can be delivered by the motor roller for continuous use without overheating in environmental temperature of 25ºC. Average torque of start/stop operation should not exceed this value.
Holding Torque	Torque the motor roller can maintain to hold a position against a load indefinitely without overheating.
Accel Torque	Average torque which is present during the acceleration ramp up to set speed. This torque value can be used to calculate real acceleration time of an application taking into account all of the losses due to idler roller and/or belts.