Pulseroller Products / Motor Rollers /
Extension cables are available from Pulseroller for both Senergy and Senergy-Ai motor units. The amount of total extension cable length is dependent on motor unit type as well as controller operating mode.
Extension Cable Ordering Information
Extension Cable Guidelines
The following guidelines apply to both Senergy (JST connector) and Senergy-Ai (M8 connector)
| Operation Mode | Total Recommended Length (motor cable + extension cable) |
Maximum |
| {}=. ECO | 3m or less | {}=. 5m |
| {}=. BOOST | {}=. 2m or less | {}=. 5m |
| {}=. BOOST 8 | {}=. 1m or less | {}=. 5m |
| {}=. 1 ECO+ | {}=. 2m or less | {}=. 5m |
1 ECO+ is only available for Senergy-Ai motor units
Minimum Bending Radius
| Application | Description | Min. Bend Radius |
| {}=. Static | {}. Cable does not move in the course of normal conveyor or machine running or cycle | {}=. 21 mm |
| {}=. Dynamic | {}. Cable moves in the course of normal conveyor or machine running or cycle | {}=. 42 mm |