Pulseroller Products / Motor Rollers /
| Senergy | Senergy-Ai | Senergy-Ai-48 | Senergy-IDC | HBR | |
| {}>. Available Tube Diameters | \5={}. 48.6 mm (1.9”) 50 mm (1.97”) 60.5 mm (2.38”) |
||||
| {}>. Motor Cable Length | {}=. 600 mm (24”) | \2={}. 1000 mm (39”) | {}=. 500 mm (20”) | {}=. 1000 mm (39”) | |
| {}>. Motor Controller Connection | {}=. 9 Pin JST | \2={}. 4 Pin M8 | {}=. 5 Pin M8 | {}=. 4 Pin M8 | |
| {}>. Speed Codes Available | \2={}. 10, 15, 20, 25, 35, 45, 60, 75, 95, 125, 175, 215 | {}=. 15, 20, 35, 45, 60 | {}=. 15, 20, 35, 45, 60, 95 | {}=. 45:1, 18:1, 11:1 | |
| {}>. Washdown Model Available | \3={}. Yes | {}=. No | {}=. Yes | ||
| {}>. Freezer Model Available | \5={}. Yes | ||||
| {}>. Mechanical Holding Brake Option | {}=. Yes | \3={}. No | {}=. Included | ||
| {}>. Ambient Temperature | \5={}. -10 ~ 40º C (14 ~ 104º F) | ||||
| {}>. Ambient Humidity | \5={}. 10 ~ 90 RH (No Condensation) | ||||
| {}>. Certifications | \3={}. CE, UKCA, RoHS, IP54 UL Recognized to UL 1004-1 |
\2={}. CE, UKCA, RoHS, IP54 | |||
| {}>. Input Voltage | \2={}. 24 VDC | {}=. 48 VDC | {}=. 24 VDC | {}=. 24/48 VDC | |
| {}>. Nominal Power Output | \2={}. 40W (50W in BOOST Mode) | {}=. 50W | {}=. 38W | {}=. N/A | |
| {}>. Rated Current | \2={}. 2.5A (3.5A in BOOST Mode) | {}=. 1.6A | {}=. 2.4A | {}=. N/A | |
| {}>. Starting Current | \2={}. 5A BOOST Mode / 8A BOOST-8 Mode | {}=. 4.0A | {}=. 3.0A | {}=. N/A | |
| {}>. Maximum Motor RPM | \2={}. 5800 ECO / 4200 BOOST & BOOST-8 | {}=. 7000 | {}=. 5800 | {}=. N/A | |
| {}>. Minimum Motor RPM | \4={}. 580 | {}=. N/A | |||
| {}>. Minimum Duty Cycle | \2={}. 0.5 sec ON / 0.5 sec OFF (1.5 sec OFF when in BOOST-8 Mode) |
\3={}. 0.5 sec ON / 0.5 sec OFF | |||
| {}>. Continuous Operation | \2={}. At rated load/current in ECO Mode | \2={}. No overheat at rated load/current | {}=. N/A | ||
| {}>. Compatible Controls | ConveyLinx ConveyLinx-HTF ConveyLinxE ConveyLinxE-HTF E-QUBE EZ-QUBE EZ-QUBE-W EZ-QUBE-HTBF |
ConveyLinx-Ai2 ConveyLinx-Ai3-24-FC ConveyLinx-Ai3-24-RC MotionLinx-Ai E-QUBE-Ai EZ-QUBE-W-Ai |
ConveyLinx-Ai2-48 ConveyLinx-Ai3-48-FC |
Any 3rd Part Control that provides: Pin 1: +24V Pin 2: Direction Pin 3: Gnd Pin 4: Error Pin 5: Analog Speed |
ConveyLinx-Ai2 ConveyLinx-Ai2-48 ConveyLinx-Ai3-24-FC ConveyLinx-Ai3-24-RC ConveyLinx-Ai3-48-FC MotionLinx-Ai |