Pulseroller Products / Motor Rollers / Performance Data / Senergy-IDC – 48.6 mm /
| Analog Voltage |
Motor RPM |
Analog Voltage |
Motor RPM |
|
| {}=. 0 < V < 2 | {}=. 0 | {}=. | {}=. 6.1 | {}=. 3335 |
| {}=. 2.3 | {}=. 580 | {}=. | {}=. 6.3 | {}=. 3480 |
| {}=. 2.5 | {}=. 725 | {}=. | {}=. 6.5 | {}=. 3625 |
| {}=. 2.7 | {}=. 870 | {}=. | {}=. 6.7 | {}=. 3770 |
| {}=. 2.9 | {}=. 1015 | {}=. | {}=. 6.9 | {}=. 3915 |
| {}=. 3.1 | {}=. 1160 | {}=. | {}=. 7.1 | {}=. 4060 |
| {}=. 3.3 | {}=. 1305 | {}=. | {}=. 7.3 | {}=. 4205 |
| {}=. 3.5 | {}=. 1450 | {}=. | {}=. 7.5 | {}=. 4350 |
| {}=. 3.7 | {}=. 1595 | {}=. | {}=. 7.7 | {}=. 4495 |
| {}=. 3.9 | {}=. 1740 | {}=. | {}=. 7.9 | {}=. 4640 |
| {}=. 4.1 | {}=. 1885 | {}=. | {}=. 8.1 | {}=. 4785 |
| {}=. 4.3 | {}=. 2030 | {}=. | {}=. 8.3 | {}=. 4930 |
| {}=. 4.5 | {}=. 2175 | {}=. | {}=. 8.5 | {}=. 5075 |
| {}=. 4.7 | {}=. 2320 | {}=. | {}=. 8.7 | {}=. 5220 |
| {}=. 4.9 | {}=. 2465 | {}=. | {}=. 8.9 | {}=. 5365 |
| {}=. 5.1 | {}=. 2610 | {}=. | {}=. 9.1 | {}=. 5510 |
| {}=. 5.3 | {}=. 2755 | {}=. | {}=. 9.3 | {}=. 5655 |
| {}=. 5.5 | {}=. 2900 | {}=. | {}=. 9.5 | {}=. 5800 |
| {}=. 5.7 | {}=. 3045 | {}=. | {}=. 10 < V < 12 | {}=. 5800 |
| {}=. 5.9 | {}=. 3190 | {}=. | {}=. V>13 | {}=. 0 |
Operational Behavior
The analog voltage at or near the lowest and highest levels have different behaviors depending on whether motor is running or stopped when these analog voltages are applied. The following chart illustrates these various behaviors.
| Analog Voltage | Target Motor RPM |
|---|---|
| {}=. Below 2.1 | {}. 0 – Regardless if motor is running or stopped when voltage is applied |
| {}=. 2.1 < V < 2.3 | {}. 0 – If motor is stopped when voltage is applied 580 – If motor is running when voltage is applied |
| {}=. 2.3 < V < 9.5 | {}. RPM per Chart |
| {}=. 9.5 < V < 12 | {}. 5800 – Regardless if motor is running or stopped when voltage is applied |
| {}=. 12 < V < 13 | {}. 0 – If motor is stopped when voltage is applied 5800 – If motor is running when voltage is applied |
| {}=. 13 < V | {}. 0 – Regardless if motor is running or stopped when voltage is applied |