Appendix /

	ConveyLinx ERSC ✅	ConveyLinx-Ai 24V ✅	ConveyLinx-Ai 48V ✅
	ConveyLinx-ECO ✅	ZPA Mode ✅	PLC I/O Mode ❌

The Touch & Go function is available in ZPA mode and when activated causes the MDR in the activated zone to sense rotational movement of the MDR in its default direction. If this rotational movement (such as someone pushing a carton onto the zone) is of sufficient duration and speed; the zone will “wake up” as if its upstream interlock had been energized. You enable this function by checking the appropriate Upstream or Downstream checkbox in the Touch & Go area.

You can set this functionality for either or both the Upstream and Downstream Zones in the direction of flow. In this example we checked the Upstream zone

!Touch & Go is only applicable for ZPA mode. Do NOT use Touch & Go with Servo Braking

!Touch & Go functionality is NOT a substitute for a wake up photo eye sensor