Appendix /

	ConveyLinx ERSC ✅	ConveyLinx-Ai 24V ✅	ConveyLinx-Ai 48V ✅
	ConveyLinx-ECO ✅	ZPA Mode ✅	PLC I/O Mode ❌

By default, and without intervention; all zones in between the most upstream and most downstream zones always try to convey items downstream if the next downstream zone is clear. To cause an intermediate zone to accumulate based upon a wired signal, you need to configure the Interlock Input as an Accumulate signal.

Accumulate Control for ConveyLinx-ERSC Family

Accumulate Control for ConveyLinx-Ai2/Ai3 Family

Accumulate Control for ConveyLinx-ECO