Appendix /

	ConveyLinx ERSC ✅	ConveyLinx-Ai 24V ✅	ConveyLinx-Ai 48V ✅
	ConveyLinx-ECO ✅	ZPA Mode ✅	PLC I/O Mode ❌

Only use the Interlock Input signal for the Upstream Interlock on the most upstream zone of a network. Do not use the Upstream Interlock function on any of the other zones whose ConveyLinxモジュール has an upstream connection to another ConveyLinxモジュール. You may get unexpected results because signal may or may not over-ride the status coming from upstream over the network.

Similarly, only use the Interlock Input signal for the Downstream Interlock on the most downstream zone of a network. Do not use the Downstream Interlock function on any of the other zones whose ConveyLinxモジュール has a downstream connection to another ConveyLinxモジュール. You may get unexpected results because signal may or may not over-ride the status coming from downstream over the network.

If you need to accumulate and release from a zone whose ConveyLinxモジュール has upstream and/or downstream connection(s) to another ConveyLinxモジュール, utilize the Local Zone Accumulate function.