Module Configuration Screen Tabs / Sensors /

	ConveyLinx ERSC ✅	ConveyLinx-Ai 24V ❌	ConveyLinx-Ai 48V ❌
	ConveyLinx-ECO ❌	ZPA Mode ✅	PLC I/O Mode ❌

The ConveyLinx ERSC Family modules display the status of how the two sensor signals were configured during the Auto Configuration Procedure. They have the below settings available for configuration. The right sensor will handle the right side of the module, and the left sensor will handle the left side of the module.

Click the appropriate icon to change either or both sensor’s blocked signal state, or their Sensor state on gain error, or their sensor debounce timer. Note that you can make the same change for a group of modules by clicking the Set All button