English
Japanese
ConveyLinx-Ai Family Complete Guide
4.1
4.1
4.0
3.1
3.0
2.1
2.0
1.7
Table of Contents
ConveyLinx-Ai Family Complete Guide
4.1
ConveyLinx-Ai Family Complete Guide — 4.1
ConveyLinx-Ai Family Complete Guide — 4.0
ConveyLinx-Ai Family Complete Guide — 3.1
ConveyLinx-Ai Family Complete Guide — 3.0
ConveyLinx-Ai Family Complete Guide — 2.1
ConveyLinx-Ai Family Complete Guide — 2.0
ConveyLinx-Ai Family Complete Guide — 1.7
ConveyLinx-Ai Family Controllers
About This Manual
Getting Started
Glossary of Terms
Module Hardware
Module Hardware Revisions
Identifying Module Components
ConveyLinx-Ai2 / ConveyLinx-Ai2-48
ConveyLinx-Ai3-24-FC / ConveyLinx-Ai3-48-FC
ConveyLinx-Ai3-24-RC
Mounting Dimensions
ConveyLinx-Ai2 / ConveyLinx-Ai2-48
ConveyLinx-Ai3-24-FC / ConveyLinx-Ai3-48-FC
ConveyLinx-Ai3-24-RC
ConveyLinx-Ai3-24-FCM / ConveyLinx-Ai3-48-FCM
Module Power Connections
ConveyLinx-Ai2 / ConveyLinx-Ai2-48
ConveyLinx-Ai3-24-FC & FCM
ConveyLinx-Ai3-48-FC & FCM
ConveyLinx-Ai3-24-RC
Assembly Instructions
Motor and Logic Power Distribution
ConveyLinx-Ai2
ConveyLinx-Ai3-24-FC & FCM
ConveyLinx-Ai3-24-RC
ConveyLinx-Ai2-48
ConveyLinx-Ai3-48-FC & FCM
Proper Motor Grounding Practice
Global Grounding Considerations
Power Supply Sizing
Motor Power for 24V Models
Motor Power for 48V Models
Logic Only Power
Motor Ports
Motor Ports as Digital Outputs
Motor Extension Cable Guidelines
Sensor Ports
Electrical Connections for Sensor Port Aux I/O
Ethernet Ports
ConveyLinx-Ai3-24-FCM / ConveyLinx-Ai3-48-FCM
LED Status Indicators
Technical Specifications
Certifications & Standards
Auto-Configuration
Device Connections to Modules
Examples that will generate errors
Motor Rotation Definition
Motor Roller Part Number
Node Connections for a Subnet
ConveyLinx Ethernet Definition
Connecting Your PC to the Network
Auto-Configuration Procedure
Expected Results
What to do if things go wrong
Default Settings and Operation
Safe Torque Off Operation
Singulation Release Mode
Flex Zone Recognition
Jam Conditions
Arrival Jam
Sensor Jam
Hard-Wired Interlocks
Automatic Module Replacement
Reset to Factory Default Settings
IOX Interface Module
Upstream Interlock
Upstream Interlock with Handshake
Downstream Interlock
Downstream Interlock with Handshake
Lane Full Interface
Local Zone Accumulate
Pin 2 Output on Aux I/O M8
Pin 2 Output on Wired Terminals
Holding Brake Roller (HBR) Usage
Using Motor Port
Using AUX I/O
Download as PDF
Pin 2 Output on Aux I/O M8
Local Zone Accumulate
Pin 2 Output on Wired Terminals
IOX Interface Module
/
Pin 2 Output on Aux I/O M8
Local Zone Accumulate
Pin 2 Output on Wired Terminals
