- Access into Facilities on the left side menu
- If there is an existing facility in which it is desired to configure BVA devices, please skip until the next step. Create an installation by clicking on the button located at the bottom on the right of the application. Hereinafter, it is necessary to complete the following information:
- Add BVA devices at the desired installation following these instructions:
- Complete the following information:
- Type: Accessible Virtual Keypad
- Reference: Reference given to the facility. It is recommended to give a descriptive name to the facility.
Click on NEXT
- Introduce the number of cabins and floors of the lift. It is necessary to include the total amount of floors, even though it is not planned to install a BVA device on external buttons.
Click on NEXT - Check abbreviations, the name of each floor and modify them if necessary, so as to coincide with abbreviations on touchpad of the lift car (substituting “0” per “G”) and adding precise description of each floor (substituting “Floor 0” per “Ground Floor”).
Click on the ADD button to create the facility which is not configured. It is necessary to push on Pending configuration on every device and configure it, as described in the following steps.
It is possible to preview how the final user App will look like by clicking on the drop-down menu at the top right of the app and then, on PREVISUALIZE. If it is desired that the installer company logo is shown, please contact support@nayarsystems.com.