Search
Related topics are listed below.
Measurements
3D Toolbox » Measurements
Global Measurements Global Measurements report one measurement per reconstruction. Common measurements include volume fraction of features, total surface area of features, and number density. Click any link below for descriptions of the many global measurements…
Measurements
Image Processor » Measurements
Measure Image Global measurements report one measurement per image. Common measurements include area fraction of features, total perimeter of features, and number of features. Click any link below for descriptions of the many global measurements available in…
Measurements
Image Processor » Functions » Measurements
Layout 1. Active measurement 2. Show/Hide Measurements Panel 3. Run active measurement on active Recipe step or shown Layers 4. Edit active measurement settings 5. Edit which Layers the active measurement is executed on 6. Generate measurements report for all…
Feature Measurements
3D Toolbox » Measurements » Feature Measurements
3D Measurements > Feature Measurements Feature Measurements allows a variety of measurements to be made from each feature in the reconstruction or Layer. 1. Size Volume: Volume of each feature. Volume Fraction: Volume fraction occupied by each feature…
Surface Measurements
3D Toolbox » Measurements » Surface Measurements
3D Measurements > Surface Measurements Surface Measurements allow you to make measurements from the currently rendered surface(s). *Surface measurements can take some time depending on the resolution and feature density of your rendered surface(s). It is recommended…
Feature Measurements
Image Processor » Functions » Measurements » Feature Measurements
Measurements > Feature Measurements Feature Measurements allows a variety of measurements to be made from each feature in the image or Layer. 1. Size Area: Area of each feature. Area Fraction: Area fraction occupied by each feature relative to entire…
Local Measurements
Image Processor » Functions » Measurements » Local Measurements
Measurements > Local Measurements Generates and visualizes measurements from individual pixels in the image. 1. Measurement Select the following types of measurements you would like to see visualized in the image. Anisotropy: Measures the amount of local…
Custom Measurements
Image Processor » Functions » Measurements » Custom Measurements
Custom Measurements Custom Measurements can be generated as an image measurement or a feature measurement. Image measurements result in a single value per image, feature measurements result in per feature measurements. Custom measurements allow for user defined…
Bulk Measurements
Session Processor / AI Session Processor » Measurements (formerly Post Processor) » Bulk Measurements
Tutorial Shows how to review and edit multiple images after they have been batch processed to segment features of interest. Measurements For lists of available measurements and their descriptions, please click the links below: Global Measurements Feature…
Color by Measurements
Image Processor » Functions » Measurements » Color by Measurements
Measurements > Color By Measurements Colors the separate features in the Current Image according to a set of feature measurements. 1. Load If you have already generated measurements beforehand and then decide to produce a color-coded image, you can load the…
Histogram of Measurements
Image Processor » Functions » Tools » Histogram of Measurements
Tools > Histogram of Measurements Plots a histogram from a .CSV or .TXT file of previously-made measurements. These files can be output from tools such as Measure Features, Color By Measurements, and Local Measurements. 1. Load To begin, load previously…
Slice-by-Slice Measurements
3D Toolbox » Measurements » Slice-by-Slice Measurements
Measurements > Slice-by-Slice Measurements Slice-by-Slice Measurements allows a variety of measurements to be made from each feature in each X-Y slice in the reconstruction. The 3D feature labeling is retained throughout the slices. Details of available measurements…
Measurements (formerly Post Processor)
Session Processor / AI Session Processor » Measurements (formerly Post Processor)
The Session Processor is used for reviewing the results of a batch or real-time process. All saved processed images are loaded and overlaid/outlined, etc. on their respective references. The user can flip through each processed result to assess accuracy. Manual edits…
v4.3.0 Release Notes
Release Notes » v4.3.0 Release Notes
New Features Custom Measurements MIPAR now supports user defined measurements using formulas and mapping. Define new measurements using algebraic expressions, using existing measurements and other custom measurements as arguments. Map any measurement output to…
v3.3.2 Release Notes
Release Notes » v3.3.2 Release Notes
New Features Slice-by-Slice Measurements in 3D Slice-by-Slice Measurements can now be made in the 3D Toolbox. This enables any of the Feature Measurements to be made from all X-Y slices, where each slice’s feature labeling is based on the full 3D labeling.…
v3.3.1 Release Notes
Release Notes » v3.3.1 Release Notes
Bug Fixes [All Apps] Would not be properly informed of unsupported image formats when trying to open [Color by Measurements] Changing the format of feature ID labels would duplicate the labels [Deep Learning Trainer] Image would not display properly after edits…
Measurement Layout
Session Processor / AI Session Processor » Measurements (formerly Post Processor) » Measurement Layout
Measurement Panel Layout Image Add global measurements, for example; total layer area, layer feature count, layer area fraction. Feature Add feature measurements, for example; area per feature, roundness per feature, nearest neighbor distance per feature. View…
v4.3.1 Release Notes
Release Notes » v4.3.1 Release Notes
Improvements Added the ability to save the current view from the Image Processor into a recipe, so that the view is restored when the recipe is restored. Remembered settings include Simple Mode, showing or hiding measurements, overlay vs. outline and their…
Layout
Report Generator » Layout
Report Types Available report types are as follows: Report Type Generated From Single Image Global Measurements table in Image Processor Single Image Feature Color by Measurements Single Image Local Local…
v4.0.0 Release Notes
Release Notes » v4.0.0 Release Notes
New Features Curve Fitting Added curve fitting to the Color by Measure, Local Measurements and Histogram of Measurements windows. Users are now able to add normal, log normal and bimodal fits to their data, as well as display fit parameters. These are…
Variables and Operators
Image Processor » Functions » Measurements » Custom Measurements » Variables and Operators
Variables and Operators Helpful list of all valid formula operators and their syntax as well as built in and custom measurement variables. Variables and Operators windows is accessed through Custom Measurement Manager>Create New/Edit>Variables/Operators 1.…
v3.4.0 Release Notes
Release Notes » v3.4.0 Release Notes
New Features Local Measurements in Recipe Add local measurements as a step in the recipe! They can be displayed with a simple click after recipe loading and summary stats (e.g., mean, min, max, etc.) of the local measurement will appear in the global…
recipeMeta()
Python API » Library » recipeMeta()
The recipeMeta function is used to retrieve meta data from a recipe file. Currently returns: MIPAR version, calibration factor, units, date and time last modified, layers, layer colors and measurements. Arguments Args: recipePath: file path to recipe as raw…
v3.4.0 API Release Notes
Python API » Release Notes » v3.4.0 API Release Notes
Functionality All engine changes have been brought over from: v3.4.0 exeRecipe now accepts a python numpy array as an input: exeRecipe added aboutAPI method which returns the API version, and license status: aboutAPI Hotfixes 3.4.0.2 Summary stats of some…
Session Processor / AI Session Processor
Session Processor / AI Session Processor
Application Description The Session Processor and AI Session Processor is used to review Batch Process Sessions, generate measurements on a data set and train new Deep Learning Models. Topics Layout Measurements AI Training
v3.0.4 Release Notes
Release Notes » v3.0.4 Release Notes
Bug Fixes Fixed bug where MIPAR loads a color image as grayscale due to small thumbnail in second TIF page Fixed bug where error tone is given when entering a factor in Resize Image Fixed bug where table from “Ruler Tool” is not shown properly in…
Simple Recipe Mode
Image Processor » Simple Recipe Mode
Simple Recipe Mode collapses the Recipe display, showing only flagged steps and layers. This enables the Recipe end-user to easily ignore most steps and make adjustments only to important ones, without having to search through the entire Recipe. In addition, the…
exeRecipe()
Python API » Library » exeRecipe()
The exeRecipe function is used to execute a given recipe on a given image and return the binary mask data and their corresponding measurements. *As of 3.4.0, exeRecipe() will no longer call startLicenseMan() before recipe execution, it must be called before exeRecipe.…
Intercepts
Image Processor » Functions » Measurements » Intercepts
Measurements > Intercepts Random Lines Measures metrics such as mean intercept by drawing a specified number of random or rotating lines through the features in the Current Image. 1. Number of Lines Number of lines to draw 2. Noise Removal Method for…
Session Processor (formerly Post Processor)
Getting Started » Tutorials » Session Processor (formerly Post Processor)
Reviewing a 2D Batch Shows how to review and edit multiple images after they have been batch processed to segment features of interest. Generating Measurements Shows how to generate measurements from multiple images after they have been batch processed to segment…
v4.0.1 Release Notes
Release Notes » v4.0.1 Release Notes
Improvements Included new Report Generator templates with fields for curve fit outputs. You will be prompted to replace current templates on first launch of v4.0.1.0. Apply Model will no longer force a minimum size factor. Measure Feature tool added to Session…
Image Processor
Getting Started » Tutorials » Image Processor
Detecting Creating a Recipe Describes the process of creating a segmentation recipe to identify features of interest in an image. Optimizing Steps Shows the procedures and applications for optimizing, or objectively determining, image processing…
v3.4.2 Release Notes
Release Notes » v3.4.2 Release Notes
Improvements BP and RTP will now save intermediate session files during batch, such that sessions can be reviewed and/or merged followed a batch cancellation In Simple Mode in the IP, “Measurements” is now written beside the Measurements Panel…
v3.1.0 Release Notes
Release Notes » v3.1.0 Release Notes
New Features Copy & Paste It’s finally here. Now you can copy and paste an unlimited number of Recipe steps. To copy: click and drag, Shift-click, or Ctrl-click to select multiple steps and right-click > “Copy”, or “Ctrl+C”…
Curve Fitting
Image Processor » Functions » Tools » Curve Fitting
Introduction MIPAR is able to fit a probability distribution curve to a measurement histogram. The supported fit types are: Normal, Log-normal and Bimodal. Normal Fit MIPAR uses a Gaussian distribution function to generate a probability curve from the feature…
Intensity Mean
3D Toolbox » Measurements » Intensity Mean
3D Measurements > Intensity Mean Measures the average grayscale intensity within selection.
Intensity Sum
3D Toolbox » Measurements » Intensity Sum
3D Measurements > Intensity Sum Measures the total of grayscale intensity within selection.
Count
3D Toolbox » Measurements » Count
3D Measurements > Count Reports how many selected features are present in the reconstruction.
Surface Area
3D Toolbox » Measurements » Surface Area
3D Measurements > Surface Area Measures the total surface area of the selected features.
Volume
3D Toolbox » Measurements » Volume
3D Measurements > Volume Measures the total volume of selected pixels in the reconstruction.
Area
Image Processor » Functions » Measurements » Area
Measurements > Area Measures the total area of selected pixels in the Current Image.
Count
Image Processor » Functions » Measurements » Count
Measurements > Count Measures the total number of separate features in the Current Image.
Perimeter
Image Processor » Functions » Measurements » Perimeter
Measurements > Perimeter Measures the total perimeter length around all features in the current image.
v3.3.0 Release Notes
Release Notes » v3.3.0 Release Notes
New Features Express Licenses Express Licenses are now available. These “runner licenses” are available at reduced rates and only allow recipe running (not building). Express Licenses provide all other Base License functionality. They are an…
Intensity StdDev
3D Toolbox » Measurements » Intensity StdDev
h.3 3D Measurements > Intensity StdDev Measures the standard deviation of grayscale intensity within selection.
v4.5.0 Release Notes
Release Notes » v4.5.0 Release Notes
New Features Spotlight Extension We are excited to introduce MIPAR Spotlight. Integrated into the Image Processor, Spotlight enables the next generation of feature detection. Spotlight behaves like any other detection Recipe step, so MIPAR Clean-up,…
The Recipe
Image Processor » The Recipe
MIPAR’s unique technology is the Recipe. Like an engine of a car, you use the one that’s right for the job. Make them yourself, start with one from the 80+ built-in templates, or get one custom-designed for you. Recipes are built in the Image Processor,…
Image Dimensions
Image Processor » Functions » Measurements » Image Dimensions
Measurements > Image Dimensions Measures the X and Y dimensions of the Current Image. May be performed on grayscale Current Images.
Number Density
3D Toolbox » Measurements » Number Density
3D Measurements > Number Density Number Density measures the number of features per unit volume, where the total volume is specified in the ‘Relative To’ window.
Save Recipe
Image Processor » Functions » File » Save Recipe
File > Save Recipe Save current Recipe as an RCP-file. The current processes, measurements, and calibration factor will be saved as into the Recipe.
Save Recipe As
Image Processor » Functions » File » Save Recipe As
File > Save As Recipe Save current Recipe as an RCP-file with a specified name. The current processes, measurements, and calibration factor will be saved as into the Recipe.
Tools
Image Processor » Functions » Tools
Contains miscellaneous tools for handling data output by MIPAR functions. Functions Histogram of Measurements Construct Polar Plot
JSON Output
REST API » JSON Output
Process JSON Structure Output The process call returns a JSON structure that represents the recipe output. Field explanation: : any layers that were added to the recipe binary: the logical image that shows what was detected : statistic of any measurement that was…
Remove Edge Features
Image Processor » Functions » Clean-Up » Remove Edge Features
Clean-Up > Remove Edge Features Removes features if they contact the edge of the image. Tips Useful for removing partial features in the image; recommended for generating representative size measurements.
v4.2.2 Release Notes
Release Notes » v4.2.2 Release Notes
Improvements Added dedicated Path Length image and feature measurements Added ability to measure the exact floating-point Euclidean distance map as a Feature Image Intensity measurement Feature Measurements > Intercepts options have been changed from…
Surface Area Fraction
3D Toolbox » Measurements » Surface Area Fraction
h.3 3D Measurements > Surface Area Fraction Surface Area Fraction measures the surface area of all the selected features in the active layer and divides it by the surface area of the layer specified in the ‘Relative To’ window.
Volume Fraction
3D Toolbox » Measurements » Volume Fraction
3D Measurements > Volume Fraction Measures the volume fraction of the selected pixels in the reconstruction. Counts all selected pixels in the active layers and divides it by the number of pixels in the layer specified in the “Relative To” window.…
Introduction
Getting Started » Introduction
MIPAR is a revolutionary image analysis software, capable of identifying and measuring features from nearly any image one can capture. Our users have shown it to be perhaps the most the efficient and flexible image processing software on the planet. Through five…
v3.4.1 Release Notes
Release Notes » v3.4.1 Release Notes
Improvements Added a preference to increase the amount of memory available for opening specialty file formats with Bio-Formats Removed “Enter Dimensions” entry from Crop menu in 3D Toolbox since functionality is present in Crop > Draw Bug…
Manage Layers
Image Processor » Functions » View » Manage Layers
View > Manage Layers While Layers are most conveniently set, edited, and removed from the controls directly in the Image Processor, this window allows more control over Layer positioning. It also provides a comprehensive management center for your Layers. Layers are…
v4.1.1 Release Notes
Release Notes » v4.1.1 Release Notes
Bug Fixes Viewing mode stays in “Layers” after switching from Simple to Detail after loading recipe in Image Processor. Average neighbor distance is now properly reported for only 2 features. Fixed bug when loading out-of-date recipes that apply…
Preferences
Getting Started » Preferences
Layout 1. MIPAR Open Directory Default folder for opening and image or recipe on MIPAR launch. 2. Calibration and Measurements Units Calibration units are used to display the scale bar and are used as default during recipe calibration. Measurement units are used…
Number Density
Image Processor » Functions » Measurements » Number Density
Measurements > Number Density Measures the total number of separate features per area in the Current Image, or per selection area in a chosen Memory Image. 1. Measure Relative To Choose to measure relative to either the entire image, or the selection in a…
v4.2.1 Release Notes
Release Notes » v4.2.1 Release Notes
Improvements Flatten background can now accept an empty value. Bug Fixes Improved MIPAR error handling when loading a broken recipe. Improved Report Generator handling of vector elements in the current panel. Scale factor stays accurate after the last…
Batch Pause and Resume
Batch Processor » Batch Pause and Resume
Resuming a batch It is possible to resume a batch process that has finished or been stopped, provided the session has not been edited in the Session Processor. To resume a batch, use the “Resume Session” button to load the session file (.ssn or…
v3.2.1 Release Notes
Release Notes » v3.2.1 Release Notes
Bug Fixes Fixed bug where recipes would not run properly when making Minimum Diameter feature measurements on layers without features Fixed bug with launching Save All Images when reference images had .jpeg or .tiff extensions Fixed bug where Report Generator…
v4.4.0 Release Notes
Release Notes » v4.4.0 Release Notes
New Features Pause/Resume Batch Processing We are pleased to introduce a new Save/Resume feature to our Batch Processor and Real-Time Processor, which allows users to pause active batch or real-time processing, and resume at a later time. Previous sessions…
Distance Map
Image Processor » Functions » Morphology » Distance Map
Morphology > Distance Map Generates a grayscale distance map of the current segmentation where each pixel is colored by its euclidean distance to the nearest empty pixel. White = zero distance, black = 255 distance. The original distance map with floating-point…
3D Toolbox
3D Toolbox
Requires 3D Extension The 3D Toolbox is used for visualizing and editing Image Stacks as well as visualizing, editing, and quantifying 3D Reconstructions. Reconstructions can be exported to other visualization applications such as commercial Avizo and open source…
*Intensity Mean
Image Processor » Functions » Measurements » *Intensity Mean
Measurements > *Intensity Mean Requires Companion Image Measures the average grayscale intensity within selection based on latest Companion Image MIPAR will generate the intensity measurement using the original image bit depth, see Companion Image for a list of…
Count Fraction
Image Processor » Functions » Measurements » Count Fraction
Measurements > Count Fraction Measures the count of features in the Current Image as a percentage relative to the count of features in a chosen Memory Image. 1. Measure Relative To Choose which Memory Image to use to measure the count fraction. The feature count…
Area Fraction
Image Processor » Functions » Measurements » Area Fraction
Measurements > Area Fraction Measures the area fraction of selected pixels in the Current Image. Counts all selected pixels and divides the number by either the total number of pixels in the image, or the total number of selected pixels in a chosen Memory Image. …
*Intensity StdDev
Image Processor » Functions » Measurements » *Intensity StdDev
Measurements > *Intensity StdDev Requires Companion Image Measures the standard deviation of grayscale intensity within selection based on latest Companion Image MIPAR will generate the intensity measurement using the original image bit depth, see Companion Image…
*Intensity Sum
Image Processor » Functions » Measurements » *Intensity Sum
Measurements > *Intensity Sum Requires Companion Image Measures the total of grayscale intensity within selection based on latest Companion Image MIPAR will generate the intensity measurement using the original image bit depth, see Companion Image for a list of…
Batch Processor
Batch Processor
The Batch Processor is used for batch applying a Recipe to multiple images. A batch process will save the last Recipe step (or each Layer step) for each image, along with a spreadsheet of any global or feature measurements that were set in the Recipe.…
v3.0.0 Release Notes
Release Notes » v3.0.0 Release Notes
Major New Features Deep Learning The most significant new technology to come to MIPAR yet. Teach MIPAR to detect even the most complex features simply by tracing. Models are trained in the new Deep Learning Trainer. Trained models can be applied to images as…
Perimeter Fraction
Image Processor » Functions » Measurements » Perimeter Fraction
Measurements > Perimeter Fraction Measures the total perimeter fraction of features in the current image. This is calculated as the total perimeter length divided by the either the total number of pixels in the image, or the total number of selected pixels in a…
Overview
Getting Started » Tutorials » Overview
Tour Take a tour of MIPAR’s powerful features and intuitive workflow. You’ll see examples of feature detection, batch processing, and measurements. Demo Watch a full demo of MIPAR’s operation including the Image Processor, Batch Processor,…
Specific Feature
Image Processor » Functions » View » Specific Feature
View > Specific Feature Specific Feature allows you to view where the feature is in the image by highlighting. The list of feature numbers can be found by generating feature measurements. Then, you will be able to tell what the maximum number of features you…
*Correlation Coefficient
Image Processor » Functions » Measurements » *Correlation Coefficient
Measurements > *Correlation Coefficient Requires Companion Image Measures the normalized and absolute correlation coefficient [1-3] between the Current and Companion images. The normalized value is a measure of image similarity that well-suited for images of…
Real-Time Processor
Real-Time Processor
The Real-Time Processor is similar to the Batch Processor, but used for applying a Recipe to multiple images, every time a new image is added to a folder being “watched”. Any global or feature measurements added to the recipe will be output into the save…
v3.0.5 Release Notes
Release Notes » v3.0.5 Release Notes
Bug Fixes Addressed bug where resizing Manual Edit windows can cause editing tools to crash Fixed bug where Manual Edit would crash when “interruptible” while running a batch which contained a Crop Image step Fixed bug where white background would…
Developing an Analysis Workflow
Checkpoint (beta) » Developing an Analysis Workflow
Required materials MIPAR Base + Report Generator Images to analyze Building the recipe 1. Using the standard images and the MIPAR Image Processor, develop a recipe to perform the desired analysis 2. Record any Preferences that may impact analysis: Measurement…
General Layout
Session Processor / AI Session Processor » General Layout
Below is labeled screenshot of the Post Processor which reveals the layout of and purpose behind each user interface element. Measurements Layout AI Layout *See the Keyboard Shortcuts page for shortcuts relevant to the Post Processor.
*Mutual Information
Image Processor » Functions » Measurements » *Mutual Information
Measurements > *Mutual Information Requires Companion Image Measures the normalized and classical (absolute) amount of mutual information [1,2] between the Current and Companion images. The normalized value is a measure of image similarity that is well-suited for…
Image Processor
Image Processor
The Image Processor is the most commonly used app. It is used for building and editing Recipes, as well as applying Recipes to single images. Recipes are sequences of image processing steps, in the right order and with the right settings, which work to identify…
Estimate Count
Image Processor » Functions » Measurements » Estimate Count
Measurements > Estimate Count Estimates number of features as the total area of selected pixels in a layer divided by the average area of features in a chosen Memory Image. Essentially, it determines how many average features from the Relative To selection would fit…
Intercepts
3D Toolbox » Measurements » Intercepts
3D Measurements > Intercepts Random Lines Measures metrics such as mean intercept by drawing a specified number of random lines through the features in the reconstruction. 1. Number of Lines Number of lines to draw 2. Noise Removal Method for removing small…
v4.1.0 Release Notes
Release Notes » v4.1.0 Release Notes
New Features Load Multiple Images into Image Processor Image Processor can now open multiple images to combine into channels. Use File > Open Images to Channels. Batch Process Multichannel Data Using Alternative Data Structure Batch Processor can now…
Introduction
Python API » Introduction
MIPAR API is a powerful tool that packages the MIPAR engine into a Python library. Scope The MIPAR API was developed to meet the needs of customers who are already using MIPAR to do powerful image analysis, but would like to setup “headless” workstations…
v3.4.4 Release Notes
Release Notes » v3.4.4 Release Notes
Improvements Added preference to normalize images before scaling to 8-bit. Preference is on by default and will continue normalizing 16-bit and 32-bit images based on their min and max when scaling to 8-bit. With preference off, 16-bit and 32-bit images will not…
v3.3.3 Release Notes
Release Notes » v3.3.3 Release Notes
Bug Fixes Fixed bug where feature measurements in PP could in some cases be formatted with incorrect units Fixed bug where scale factor would not display correctly in PP when reading a Bio-Formats image with embedded scale factor Fixed bug where mouse movement…
v3.3.4 Release Notes
Release Notes » v3.3.4 Release Notes
Improvements Translate Image now supports either black or white image padding API product will now appear in list after activation if on user’s license Bug Fixes Fixed bug which could cause Local Measurements to not launch properly Fixed bug where…
Functions
Image Processor » Functions
This section provides details on all functions available in MIPAR’s Image Processor. Each function’s page contains the following information: Title Path Summary Screenshot (if applicable) Parameters (if applicable) References (if…
Path Length
Image Processor » Functions » Measurements » Path Length
Measurements > Path Length Measures the total path length of features in the current image. This path is first calculated by applying the Thin function, and then the path length is calculated with a formula similar to that used in Vossepoel and Smeulders, 1982 with…
Introduction
REST API » Introduction
MIPAR REST API is a powerful tool that packages the MIPAR engine into a Docker Image Scope The MIPAR REST API was developed to meet the needs of customers who are already using MIPAR to do powerful image analysis, but would like to setup “headless”…
Find Text
Image Processor » Functions » Segmentation » Advanced » Find Text
Segmentation > Advanced > Find Text Finds text in the Current Image using optical character recognition (OCR) [1] and places boxes around each detected word. *See the “Text” item under “Based on Companion” in Feature Measurements for…
v3.2.2 Release Notes
Release Notes » v3.2.2 Release Notes
New Functions Replace With > Nearest Distance replaces each feature with a line between it and its nearest neighbor. Bug Fixes Fixed bug where inserting an Apply Model step below another doesn’t update the dependencies of later Call Output steps Fixed…
Layers
Image Processor » Layers
Each Recipe step outputs either an grayscale, or B/W image. B/W images are often the goal, as the black pixels represent the selection at that point in the Recipe. If you are only targeting one set of features, a final B/W image is all you need. However, if you need to…
The Session
Batch Processor » The Session
Sessions When running a MIPAR Batch, Real Time Process, building a data set in the Session Processor or AI Session Processor, MIPAR will organize the data into a session. In the Batch Processor and Real Time Processor MIPAR automatically collects the detected binary…