Search
Related topics are listed below.
Using a device alias
Use Cases » Using a device alias
Devices aliases are used when a single piece of hardware requires an ID to communicate with the physical device. An example of this would be a lighting system, if you know Node 10 is the Podium light, we would create an alias entitled podium light. Creating the…
Device Macros
Builder » Devices » Creating Device Driver » Categories » Icon List » Device Macros
Some devices require a multiple command sequence in order to execute a single action. In a scenario such as this you would create a System Macro by following the steps below. Add System Macro There are three types of System Macros that can be created within this…
Device Models
Builder » Devices » Creating Device Driver » Device Models
In the Device models section of the Device Driver Editor, you will need to list all of the supported models in the protocol. Many device protocols will support multiple models, be sure to list each supported model in this section of the editor.
Device Attributes
Builder » Devices » Creating Device Driver » Device Attributes
Attributes are defined per device. We have two options within the Device Driver editor; Allowing combined commands and enabling virtual states. Explanations for both can be found below. Combined Commands Some devices will support the ability to group multiple…
Virtual State Device
Use Cases » Virtual State Device
Virtual state devices provide the programmer the capability to create unique environments to provide a customized solution. The virtual states can be tracked across interfaces and used to update widgets within each interface. Importing Virtual State device Open…
New Device Upload
Builder » Devices » New Device Upload
Overview Some devices have been added to a testing queue, but have not been uploaded to our Production server. If you are looking for such a device, one of our support representative may send you a .json file for uploading purposes. If you have received such a file…
Creating Device Driver
Builder » Devices » Creating Device Driver
Once the Device Driver Editor is opened you will see the Device Information screen. This includes the Device Manufacturer, Device Type, note section and a Driver Id for this new device. If the device being created requires Lua scripting, you must click on the box next…
v1.2 Device Driver Editor
Release Notes » v1.2.0 » v1.2 Device Driver Editor
Bug Fixes Possible Values dropdown when picking parameter values in macros shows blank if the parameter doesn’t have device encoded value Trigger command parameters not always correct
v1.2.5 Device Driver Editor
Release Notes » v1.2.5 » v1.2.5 Device Driver Editor
Macros reset the value of trigger commands when changes are saved Single backslashes in data field are not being sent
Device Driver Editor Updates
Release Notes » v1.1.0 » Device Driver Editor Updates
New Features Added the ability to Copy/Paste content from different sections of the DDE Added the ability to Preview the Command string of a capability Bug Fixes DDE – When a user deletes a ref/parameter, it remains in the code data DDE – Heartbeat data…
Displaying System Device Information
Use Cases » Displaying System Device Information
The System Device appears in the Devices tab in each Space. The System Device consists of information including: Time, Date, Weather and System State. You can use the System Device to track when the system is on or off, or you can add the time/date to your interface.…
v1.5.5 Device Driver Editor
Release Notes » v1.5.5 » v1.5.5 Device Driver Editor
New Features Added the ability to copy the simulated string that is created within the Device Driver Editor Bug Fixes Corrected issue where Save icon was not appearing after copying new json into the Device Driver Editor
v1.5.11 Device Driver Editor
Release Notes » v1.5.11 Device Driver Editor
Overview This is a patch release to correct issues with the edit JSON function within the Device Driver Editor. Below are the bugs that were corrected with this patch. Bug Fixes Corrected issue where pasting JSON into a new or existing driver did not update the…
Using WOL command
Use Cases » Using WOL command
What is WOL? WOL or Wake on Lan is supported by some devices as a method to Power on the unit via the lan connection to the unit. Devices such as Kramer VIA, Sony Blu-ray and Sony TV’s require WOL as the only way to Power the unit on while controlling the…
Custom States within System Device
Release Notes » v1.2.0 » v1.2.0 Builder » Custom States within System Device
Overview Previously, in prior version of Kramer Control in order to track a Virtual state you needed to import the Kramer – Virtual Device driver and create aliases for tracking. With the release of v1.2.0 we have added this same capability within the System…
How to: Device Driver Basics
Kramer Control Videos » How to: Device Driver Basics
Device Driver Basics
Device Command Troubleshooting – Hercules
Use Cases » Device Command Troubleshooting – Hercules
Overview In this article we will discuss how to troubleshoot Device commands being sent through the Kramer Control Brain. We have found Hercules to be one of the best tools available to the end user for such troubleshooting. Hercules To download Hercules, click…
System Device – Weather Conditions
Use Cases » System Device – Weather Conditions
Overview Our System Device found within the Builder includes a Weather category that can be used to track the current conditions in your area. Many users will want to use those states to execute Events such as turning the lights on during a cloudy day. The full…
Brain gateway not showing assigned device
Use Cases » Brain gateway not showing assigned device
Overview With the current version of Kramer Control (v2.2.5) there has been an issue reported where some Projects cannot be duplicated. We have identified the issue to exist within the Builder where an archived device is showing assigned to the Brain gateway, but the…
Using the KramerAppUpdate application
KT-1010 » Using the KramerAppUpdate application
How to use the KramerAppUpdate application Initial Launch When you initially launch the app, you will be asked to allow the app to access system services. Click ‘Allow’ Selecting Apps The apps that are available and installed will appear in the…
Online Provisioning using Kramer UI
Release Notes » v2.5.0 » Online Provisioning using Kramer UI
Overview With the release of 2.5.0 programmers can now provision Brains that are connected to WAN, but by using the Kramer UI webpage. If you are not familiar with the Kramer UI webpage, click here This new feature means that the programmer no longer is required to…
Offline Provisioning using Kramer UI
Release Notes » v2.5.0 » Offline Provisioning using Kramer UI
Overview With the release of v2.5.0 programmers can now provision a Brain that is not connected to WAN. Follow the steps below to setup your Brain. Process Select Project from list of Projects Select Space from inside Project Make sure that you have Published…
Offline Unprovisioning using Kramer UI
Release Notes » v2.5.0 » Offline Unprovisioning using Kramer UI
Overview With the release of v2.5.0 programmers can now unprovision a Brain that is not connected to WAN. By creating a code within the Manager you can enter this code within the Kramer UI to unprovision a Brain without WAN access. Follow the steps below to…
How to: Adjust Slider range for controlled device
Use Cases » How to: Adjust Slider range for controlled device
Overview When a device driver is built for the database the State values match the possible range provided by the controlled device. This full range may not be used by the end user. Instead they may edit adjust the hardware to work within a set range providing a…
Creating Grouped Buttons using Custom States
Use Cases » Creating Grouped Buttons using Custom States
Overview Devices such as Video and Audio matrixes can use the same set of inputs and across multiple outputs. Using custom states with an array for the Output, we can create logic within the buttons to indicate which input is currently in use in each location. Follow…
K-Agent Setup using Kramer Control
New Kramer Tablets » K-Agent Setup using Kramer Control
Overview The K-Agent application can be setup using a device driver within Kramer Control. This driver is available in our database and can be used to remotely restart a tablet, check if the tablet is online, or to configure the deep link address for the Control…
Adding a Slider
Use Cases » Adding a Slider
Sliders are used to control devices that have discrete capabilities for level control. Two examples of discrete level control would be: the volume level of an audio device and the dimming capability of a light. This article explains two options for adding a slider to…
How to: Control KDS-6 using Kramer Control
Kramer Control Videos » How to: Control KDS-6 using Kramer Control
Using the KT-1010 – Settings, Tips & Tricks
KT-1010 » Using the KT-1010 – Settings, Tips & Tricks
Accessing the Home Page and Settings To access the Settings, you must first navigate to the Home Page and then you will be able to select the Settings app. Press the round ‘Menu’ button on the top back of the KT-1010 & enter password…
Creating a New Project
Logging Into Kramer Control Portal » Manager » Creating a New Project
Sold a new Project? The next step is to login to the Manager and begin creating the setup for your new Project installation. Opening the Project Wizard Go to Manager by selecting the Manager option within the Kramer Control Portal Shift focus to center window…
False warning when using WAN test on new Kramer UI
FAQ » False warning when using WAN test on new Kramer UI
Attention If NTP (Time server information) is disabled on your SL device the Test WAN feature on the :8000/kramerui.index/html webpage will provide a false negative about ports 443 and 35672. These ports may be open on your network, but the failed connection to the…
Creating a New User Interface
Builder » Creating a New User Interface
After creating your project and designing the project layout to include a controlled space, the next step is to launch into the Builder. Use the Builder to design a user interface for end users to control their Spaces. In this article, you will find instructions for…
Changing Frames to a Different Overlay
Use Cases » Changing Frames to a Different Overlay
You want to build a single page interface. To fit all the controls on one page, you need to add a frame to the page and then create a button that will enable the interface user to go the new frame from the main part of the page. This article explains how to create a…
Creating a Repeat on Hold Button
Use Cases » Creating a Repeat on Hold Button
There are two types of interface buttons. One type performs an action once per click and release. The other type of button repeats an action as long as the button is held and stops repeating when released. This is called a Repeat on Hold button. Examples of Repeat on…
Adding Brain Hardware to a Project
Adding Brain Hardware to a Project
Brain hardware is required in each controllable space. The Brain houses all of the programming information such as: the user interface, Macros, Events and anything else created within the Builder. This article explains how to add a Brain to your setup. Adding Brain…
Adding a State to an Event
Use Cases » Adding a State to an Event
You can program a button on your interface to change its appearance according to the State of a device. Elements of the button appearance that can be changed include: text, color, text bolding and button image. This article explains the procedure of configuring a…
How to: Create a Phone book Overlay
Use Cases » How to: Create a Phone book Overlay
Overview The process below describes the setup requirements within Kramer Control to create a Virtual rolodex for DSP devices. Process Add Frame to Page If you have not yet created Frames and Overlays – You can find more information here The size…
How to: Align grouped items to the center of a Page or Overlay
Use Cases » How to: Align grouped items to the center of a Page or Overlay
Overview This tutorial will cover how to center a set of buttons both vertically and horizontally within your Pages and Overlays. Follow the steps below to easily center your widgets within your UI pages and Overlays. Process Launch Builder Add Widgets After you…
Converging Systems Shade & Screen Control
Use Cases » Converging Systems Lighting and Screen Control » Converging Systems Shade & Screen Control
Overview Kramer Control has the ability to control the IMC-100C/BRIC and IMC-100T Motors via Network gateway communicating via Port 23 of your Network. The steps below explain how to import the proper device and create an Interface layout to control these motors.…
Copying and Pasting of Devices
FAQ » Copying and Pasting of Devices
Overview When you install multiple devices that are identical in Manufacturer and Model, you will want to save yourself some time in the Builder by Copying and Pasting those devices with a keyboard shortcut. This process will work, however there are some items that…
Use Cases
Use Cases
Overview Use cases are example scenarios that can be created when using Kramer Control. Found within this topic will be examples such as when to save vs when to publish, state based event that changes image to indicate current state and more Examples Adding…
Aliasing Wizard
Release Notes » v1.4.3 » v1.4.3 Builder » Aliasing Wizard
Overview In v1.3.1 we added an Error to the builder indicating that a Device has un-aliased parameters. This error notifies the user that a device, or multiple devices, require the Aliasing feature in order to prevent future errors. In order to make the Aliasing setup…
v2.5.0
Release Notes » v2.5.0
Version 2.5.0 This new version includes new features such as a Zoom Room widget, SSH communication type, and Offline provision & unprovisioning. This release also includes bug fixes to improve stability with both online and offline Brains. More information on the…
Controlling BiAmp Tesira Hardware
Use Cases » Controlling BiAmp Tesira Hardware
Requirements Before you can begin the Kramer Control design for control of the BiAmp hardware, you will first need to identify the Instance tag within the BiAmp programming. Locating Instance Tag Open the BiAmp Tesira software Select a control black from the…
Devices
Builder » Devices
Devices are the backbone of a successful Project installation. Importing the correct device driver and using the proper capabilities ensures a successful installation. This article explains the correct ways to search for a device and how to use a Capabilities and…
v1.4.3 Builder
Release Notes » v1.4.3 » v1.4.3 Builder
Overview Below you will a list of items that were corrected with the release of v1.4.3 Fixes Corrected issue where programmers were able to set 0 second intervals for timed events Corrected issue with the use of Drag and Drop inside the actions area of the…
Cisco Touch 10 Integration
Use Cases » Cisco Touch 10 Integration
Overview The Cisco Touch 10 can be configured, within the Cisco software, for integration with 3rd party device control; such as Kramer Control. Once the Touch 10 has been configured in such a way, Kramer Control can use the feedback from the Touch 10 to execute…
Programming Phillips Hue with Kramer Control
Use Cases » Programming Phillips Hue with Kramer Control
Overview In order to control your Philips HUE device, there are some initial steps that need to be taken outside of the Kramer Control builder to properly implement control. Follow the steps below to control your Philips HUE lights. Process In order for commands…
Communication Method
Builder » Devices » Creating Device Driver » Communication Method
The communication method section of the Device Driver indicates the method in which commands are executed from the brain to the hardware. Each communication type has different settings that can be edited within the driver Infrared IR is the most basic of control…
v1.3.3 Builder
Release Notes » v1.3.3 » v1.3.3 Builder
Overview Below are items fixed with the release of v.1.3.3 Bug Fixes Fixed issue where System Device Custom States could not be used as Reference device in another Space Fixed issue with Update Properties using the incorrect image, if the new image had been…
v2.7.0
Release Notes » v2.7.0
Overview Version 2.7 of Kramer Control is intended to improve overall stability with our Brains, our Device Drivers and Zoom Rooms. Also included in this release is a new feature called Deep Linking which allows you to use a URL to open a specific interface and page…
Converging Systems Lighting and Screen Control
Use Cases » Converging Systems Lighting and Screen Control
Overview The Converging Systems lighting controller has many options for configuration within the Kramer Control Builder. Below are some of those features and how to properly setup Kramer Control with your Converging Systems hardware. These steps must first be…
How to: Use Generic Devices
Use Cases » How to: Use Generic Devices
Overview We have added Generic drivers to our database. These generic drivers will make it easier for the programmer to add custom commands to a project. These Generic drivers will not require the programmer to enter the Device Driver editor to add commands.…
Provisioning
Adding Brain Hardware to a Project » Provisioning
Brain hardware (see Adding Brain Hardware to a Project) must be provisioned (assigned) to a space before the Kramer Control application can control the devices in the space. This article explains how to provision Brain hardware to a controlled space. The provisioning…
v1.4.3
Release Notes » v1.4.3
Overview The v1.4.3 is primarily a release to correct bugs that have existed within the Kramer Control environment. The links below detail what bugs were fixed for each of the Kramer Control functions. Brain Fixes Corrected issue with WOL device failing to…
DirecTV Genie Client Control
Use Cases » DirecTV Genie Client Control
When controlling a DirecTV Genie client system, the Genie clients operate through the main Genie DVR unit’s IP address. In this article we explain the builder setup for controlling 2 clients through a single Genie DVR. Information you need to know: IP…
v2.0.5 – Patch Release
Release Notes » v2.0.5 – Patch Release
Overview v2.0.5 is a patch release to fix bugs related to the release of v2.0.3. Below is a list of corrected issues included in the v2.0.5 patch version. Bug Fixes Brain Corrected issue with feedbacks not being processed when using RS232, GPIO, and Relay devices…
2.10.2
Release Notes » 2.10.2
Overview Version 2.10.2 has been released to improve stability and troubleshooting with Kramer Control. The improved logging, both with debug logging and standard logging, will help our customer service teams resolve issues much quicker. We have also addressed…
Brain showing incorrect time
FAQ » Brain showing incorrect time
Overview If you Brain is showing the incorrect time within your User Interface, there is a workaround to correct this issue. This has become more prominent since Daylight Savings Time occurred. Process Open Manager and Select Project Change Project Location to…
States
Builder » Devices » Creating Device Driver » Categories » Icon List » States
States are used to identify current information about the device. States include Power, Volume, Mute, Source and more. Below you will find the necessary information to setup states within a device driver. State Type User Facing Name This value represents…
Copy/Paste Improvements
Release Notes » v1.1.0 » Device Driver Editor Updates » Copy/Paste Improvements
Overview The copy and paste function within the Device Driver Builder and User Interface Builder have been updated. These new features will be discussed in the thread below. Device Driver Editor Within the Device Driver Editor you can now copy and paste between…
VS-211H Setup
Use Cases » VS-211H Setup
Overview The VS-211H is a 2×1 HDMI auto switcher that can also be controlled via Contact Closure. Instead of relying on the auto sensing capability of the VS-211H, you can force an input switch by sending a momentary contact to port 1 or 2 to initiate the switch.…
How to: Sony Edge Analytics
Use Cases » How to: Sony Edge Analytics
Overview With the current version of Kramer Control (v2.9.0 or previous) we do not officially support the authentication requirement to implement control over the Sony Edge Analytics device. However, we can control the unit using a combination of our URL widget and…
Kramer KDS 6 Gateway
Release Notes » v2.0.3 » v2.0.3 – Builder » Kramer KDS 6 Gateway
Overview With the release of v2.0 we have added a device specific gateway for the KDS 6 decoders. Since the KDS 6 decoders support RS-232 through control we have added the capability to assign a device to this gateway type. !In order for the gateway to properly…
Cisco Spark RS-232 Control
Use Cases » Cisco Spark RS-232 Control
Overview We have received some questions about configuring a Cisco Spark Kit with Kramer Control. Typically, our suggestion is to control the Cisco unit through TELNET but we have heard that some installations are blocking this connection method. The next suggestion…
v1.1.0
Release Notes » v1.1.0
Brain Big Fixes Brain – Need maximum time for execution of Lua Code Brain – Unexpected Results for Macros when Device is Connected to Multiple CommTypes Brain – StateChangeCompleteCallback and PreventStateChangeDuringStateChange tests frequently cause segfaults…
v1 Calendar Integration
Release Notes » v2.0.3 » v2.0.3 – Builder » v1 Calendar Integration
Overview Kramer Control now includes Calendar integration with Google Suite and Microsoft Exchange. Following the process listed below, you will be able to add Meeting information including Time and Date to your Kramer Control Interface. !NOTE – We recommend…
IR Learning and Command Uploading
Use Cases » IR Learning and Command Uploading
Overview If you find yourself with a Device that does not currently exist within our Database, there are a couple options to pursue to get the commands into the Builder. Submit a Device Request Create your Own Device Or, you can Learn IR commands from the…
IFTTT – Email Example Setup
Use Cases » How to: IFTTT Driver » IFTTT – Email Example Setup
Overview If you have not read the previous article on IFTTT and setting up applets make sure that you read the article in its entirety before following the steps below. Kramer Control and IFTTT IFTTT and Webhooks create a method in which a Kramer Control programmer…
Creating UI lock
Use Cases » Creating UI lock
UI Lock In a scenario where you want to restrict end user access to an area within the user interface, such as a page or overlay, you can create a lock code using a system lock device. In this tutorial we will explain the necessary setup for restricting end user…
Hardware
Builder » Hardware
Gateways are control units installed as hardware in your controlled space. These control units are required for devices that cannot be controlled over a Network and can only be controlled via IR (infrared) control, RS-232 serial control, Relay/IO contact closure and…
Builder Interface Overview
Builder » Builder Interface Overview
This article introduces you to the Builder interface. Click one of the bullet headings to go to a step by step article on the selected topic. Left Pane “UI”: – the graphic layout that is viewed by your end user. You configure the user…
Matching States via Gesture Execution
Release Notes » v1.2.0 » v1.2.0 Builder » Matching States via Gesture Execution
Overview With the release of v1.2, the programmer can now build a button that sets the value of Device 1 to the State of Device B. A practical example of this would be an Audio mixer used across multiple zones. If Zone A is currently in use and you enable Zone B but…
Known Issues
Known Issues
Overview This page is dedicated to issues that we are currently aware of. They are broken out based on where they occur in the platform. If there is a known work-around it will listed as well. As we fix the issues we will update this list by removing fixed issues.…
ClearOne Converge Pro 2
Use Cases » ClearOne Converge Pro 2
Overview This article covers the required setup when programming the User Interface to interact with the ClearOne Converge Pro 2 hardware. This article covers What device to import Aliasing of Channel Names Using the Dialer Gateway Setup Process Launch…
Kramer VS-622 DT – Pass through Control
Use Cases » Kramer VS-622 DT – Pass through Control
Overview The Kramer VS-622DT device provides the capability to tunnel RS232 commands through the HDBT port of the unit. This feature is beneficial for programmers using Kramer Control and the VS-622DT device. Follow the steps below to use this feature in your…
VS-622DT Gateway
Release Notes » v1.5.1 » v1.5.1 Builder » VS-622DT Gateway
Overview Kramer has released a new I/O controller called the VS-622DT. This unit is an All-in-One Presentation system with 6×2 4K:60 4:2:0 HDMI/HDBaseT Matrix Switching, Control Gateway that supports PoE, Power Amplifier and Maestro Room Automation. Follow the…
Events
Builder » Events
Events are scheduled actions that occur when certain conditions are met. The conditions are created within the Kramer Control Builder. Examples of conditions are: Time of Day and the Status of another device in the controlled space. This article explains how to…
Updated Dashboard
Release Notes » v2.10 » Updated Dashboard
Overview With the release of version 2.10, we have updated the look and function of the Kramer Control Dashboard. Below is a screenshot of what the updated landing screen shows when you open the new Dashboard. Theme Toggle We have added a button in the top right…
Kramer VIA
Use Cases » Kramer VIA
Follow the below process to setup a Kramer VIA within Kramer Control. Process Before the UI design can be created, make sure that the following steps are finished before moving on: Launch Kramer Control builder Import Kramer VIA device After importing the…
Macros
Builder » Macros
The Macros tab in the Kramer Control Builder enables the designer to create the necessary control macros in one place, then reference those macros throughout the controlled space. When designing multiple interface types within a single controlled space, there is bound…
Builder Updates
Release Notes » v1.1.0 » Builder Updates
New Features Added support for SL-240C brain type Added the ability to Group Images based on type when uploading multiple images Added Errors and Warnings toolbar to show issues within the builder Added support for multiple gateway types FC-21ETH Global…
Zoom Room Widget
Release Notes » v2.5.0 » Zoom Room Widget
Overview With the release of v2.5.0 Kramer Control has added the capability to integrate with a Zoom Room configuration. Kramer Control now offers a pre built widget that can be added to a Space for integration with your Zoom Room Controller. This allows you to have…
How to: Use the Ping driver
Use Cases » How to: Use the Ping driver
Overview The Ping driver provides a method for the programmer and end user to check connectivity of a particular device. You can also check outbound status of the Brain by pinging hostnames of websites such as Google or the hostnames of our required ports. Follow the…
KDS-6 Driver Update
FAQ » KDS-6 Driver Update
Overview With the update of the KDS-6 firmware, the Kramer Control driver also required an update. If you were previously using a KDS Decoder with a firmware version older than 6.4 you will need to update the driver in your Kramer Control Project/Space. Driver Update…
Errors/Warning Analysis Bar within Builder
Release Notes » v1.1.0 » Builder Updates » Errors/Warning Analysis Bar within Builder
Overview Within the builder, at the bottom right of the screen you will find icons indicating Errors and Warnings. These options are expandable and will provide details on the issue found within the Builder. Clicking on the error/warning icon will open a snack bar in…
v2.2.7 Patch Release
Release Notes » v2.2.7 Patch Release
Overview The version 2.2.7 release of Kramer Control includes fixes to Brain, Builder, Manager, Client Applications and Dashboard. More information on the included fixes can be found below. We have improved loading times for all elements that load the Project list.…
Brain Update Message
FAQ » Brain Update Message
Overview When updating any Kramer device make sure that Power is not removed from the device during the update procedure. If Power were to be removed you could seriously damage the unit requiring an RMA to replace the defective device. Tests If a Power outage…
Tablet – BRAINware
Use Cases » Tablet – BRAINware
Overview Tablet – BRAINware is the use of the KT-107 or KT1010 device to act as your Brain for the controlled space. The Tablet – BRAINware installed within the KT-107 or KT1010 does not include I/O but can be used to control smaller hardware options and…
v1.5.5
Release Notes » v1.5.5
Overview v1.5.5 includes new features inside the Builder and within the Device Driver Editor. This release also includes bug fixes within the Builder, Device Driver Editor and Dashboard. You can find out more information on these new features and bug fixes within the…
Offline Mode
Release Notes » v1.2.0 » v1.2 Manager » Express Mode » Offline Mode
Overview In a scenario where the installation occurs in an environment with no Internet access, it is recommended to follow the steps below for best results. Process Provision Brain using the Client application Remove Brain from current Network and install onto…
KC Virtual Brain Static IP
FAQ » KC Virtual Brain Static IP
Overview Follow the steps below to set a static IP address on your Kramer Virtual Brain 1 or 5 device. *For this, it will help if you have existing Linux knowledge. The process will require an SSH connection or keyboard/mouse connected to the KC Virtual…
Web URL Widget
Release Notes » v2.2.2 » v2.2.2 – Builder » Web URL Widget
Overview The URL widget allows the programmer to create a user inter actable screen within the Kramer Control UI. This widget will open most webpages on Android and iOS clients. If you are using the web client directly via the Brains IP address :8000 you will not be…
v2.2.2 – Builder
Release Notes » v2.2.2 » v2.2.2 – Builder
Overview Below you will find new features and bug fixes that are included in version 2.2 of Kramer Control New Features URL Widget – This new feature provides the programmer the ability to embed a webpage within the User Interface. More information on this…
Sign-in loop within Application
FAQ » Sign-in loop within Application
Overview The release of version 1.5.1 required an update within the code that affected requirements within Android devices. In order to correct this issue, Google Play services within the Android device will need to be updated. Follow the steps below to update Google…
Parameters
Builder » Devices » Creating Device Driver » Parameters
A parameter is a term used to describe a section or sections of a command that are user editable within the Builder. Within this thread we will discuss how to build parameters within the Device Driver Editor. Note Parameters include, but are not limited to, Zones,…
v1.3.1
Release Notes » v1.3.1
Overview Version 1.3.1 of our software adds new functionality to the Kramer Control Manager as well as bug fixes to the entire system. Manager Builder Clients Tablet – BRAINware – BRAINware} Modifications Un-provision Space is now available within…
Kramer KDS 3 & Kramer Control
Use Cases » Kramer KDS 3 & Kramer Control
Overview KDS 3 units are h.264 encoders built for HDMI signals up to 1080p60. Kramer Control can control the Encoders and Decoders that have been installed by following the process below. KDS 3 Software Before configuring the Kramer Control builder for control of…