Search
Related topics are listed below.
Adding Brain Hardware to a Project
Adding Brain Hardware to a Project
Brain hardware is required in each controllable space. The Brain houses all of the programming information such as: the user interface, Macros, Events and anything else created within the Builder. This article explains how to add a Brain to your setup. Adding Brain…
Brain Watchdog
Release Notes » v2.2.9 – Patch Release » Brain Watchdog
The Brain Watchdog is code written into the Brain to prevent performance issues when the RAM is overwhelmed, the Brain is stuck in a boot loop and/or certain ports are not responsive. When the Watchdog detects an issue like the ones mentioned the Watchdog will perform…
Brain Tips
FAQ » Brain Tips
If your brain malfunctions there are a couple URL’s you will want to know in order to verify status and download log files. General Status Enter IP address of brain followed by :8000/api/vtest/general 192.168.1.15:8000/api/vtest/general You will see a…
Attempting to Ping the Brain
FAQ » Attempting to Ping the Brain
Overview During troubleshooting one networking tool most often used is Ping. Ping is a great tool to confirm a device is connected to your Local Area Network. However, the use of Ping when trying to confirm that a Kramer Control Brain is properly running will not have…
Remote Brain Updates
Release Notes » v1.3.1 » v.1.3.1 Manager » Remote Brain Updates
Overview With the release of v1.3 we have added the functionality to Remotely update a Brain firmware from the Manager. Follow the steps below to use this feature. NOTE Only Brains running v1.3 will support this feature. If you have a Brain running a firmware version…
Brain Update Message
FAQ » Brain Update Message
Overview When updating any Kramer device make sure that Power is not removed from the device during the update procedure. If Power were to be removed you could seriously damage the unit requiring an RMA to replace the defective device. Tests If a Power outage…
v2.4 – Brain
Release Notes » v2.4 » v2.4 – Brain
New Features With the release of version 2.4 we have added new BRAINware hardware. This hardware is a server based hardware without IO. There are three types of KC Server hardware: KC-BRAINware-5 – The KC5 hardware supports up to 5 BRAINware Brains per…
v2.2.2 – Brain
Release Notes » v2.2.2 » v2.2.2 – Brain
Overview Below are new features and bug fixes that were corrected with the release of Kramer Control version 2.2.1 Bug Fixes Corrected issue where device drivers with duplicated id’s were not working upon publish. An example of this issue was Kramer Relay…
Brain API Commands
FAQ » Brain API Commands
Overview Through Terminal or another CLI interface you can send Curl commands to the Brain. You can also use Postman to send PUT commands, but this thread only focuses on the Curl commands via CLI. Commands NOTE In the below commands, you will need to replace…
Docker Brain Setup
KC-Brainware Server Documents » Kramer Server Configuration for QA » Docker Brain Setup
Overview This thread discusses the Command Line setup necessary to run a Docker Brain on your machine or Kramer Server. Below we have listed the steps necessary to complete the setup as well as system requirements your device will need to run the Docker Brain.…
Updating Brain Firmware
FAQ » Updating Brain Firmware
Follow the steps below to update the firmware on the brain hardware. This only affects the brain, this will not update the firmware on the hardware unit itself. Process Download KUpload Click here to find the latest KUpload version Download the latest Brain…
Brain showing incorrect time
FAQ » Brain showing incorrect time
Overview If you Brain is showing the incorrect time within your User Interface, there is a workaround to correct this issue. This has become more prominent since Daylight Savings Time occurred. Process Open Manager and Select Project Change Project Location to…
Installation Suggestions – Brain
FAQ » Installation Suggestions – Brain
Overview Kramer Control has a few different Brain options and this article is to explain the suggestions on what to install per space type. If you choose not to follow these suggestions, stability with the Brain could be an issue. Brain…
Downloading KC-Brain logs
KC-Brainware Server Documents » Downloading KC-Brain logs
Overview Downloading logs from KC-Brainware server Brains is currently different from SL Brains. In order to download logs from the docker brains, you will need to download the container logs directly from the docker service Downloading Docker Logs The Kramer-UI…
New Brain Information Page
Release Notes » v2.0.3 » v2.0.3 – Client Applications » New Brain Information Page
Overview Within the configuration page of the SL hardware you will find a Brain information tab. This new tab shows information to the currently provisioned space. Below is more information on the options that appear within this tab. :8000/kramer-ui/index.html …
Brain Indicator Colors and Troubleshooting
Adding Brain Hardware to a Project » Brain Indicator Colors and Troubleshooting
In the Kramer Control application, there is an indicator that changes color based on the status of the Brain. This article explains the different colors and what steps can be taken to troubleshoot any issues you may be experiencing. Green Green is the color you…
SL Brain Connection – Serial
FAQ » SL Brain Connection – Serial
!This article is ONLY needed if you cannot connect to the SL device over TCP or UDP. There are times when you may not be able to connect to an SL Brain over TCP/UDP. If you run into a situation when you need to connect and send configuration commands directly to the…
Changing Sync settings within Brain
Release Notes » v2.2.7 Patch Release » Changing Sync settings within Brain
Overview We have found that some installations have Networks where the WAN connection is inconsistent. Some Brains will drop the WAN connection temporarily, but upon reconnecting the Brain is entering into a Synchronizing state. Depending on the size of the Project,…
KC Virtual Brain Static IP
FAQ » KC Virtual Brain Static IP
Overview Follow the steps below to set a static IP address on your Kramer Virtual Brain 1 or 5 device. *For this, it will help if you have existing Linux knowledge. The process will require an SSH connection or keyboard/mouse connected to the KC Virtual…
How to: Force the Brain into an Active Offline state
Release Notes » v2.2.9 – Patch Release » How to: Force the Brain into an Active Offline state
Overview Some setups have a spotty network or no network at all. With version 2.2.9 of Kramer Control, we have added an API route that allows the programmer to configure the Offline state for the Brain. This will help in setups where Internet access is spotty and not…
Brain gateway not showing assigned device
Use Cases » Brain gateway not showing assigned device
Overview With the current version of Kramer Control (v2.2.5) there has been an issue reported where some Projects cannot be duplicated. We have identified the issue to exist within the Builder where an archived device is showing assigned to the Brain gateway, but the…
Adding a State to an Event
Use Cases » Adding a State to an Event
You can program a button on your interface to change its appearance according to the State of a device. Elements of the button appearance that can be changed include: text, color, text bolding and button image. This article explains the procedure of configuring a…
Adding Pages
Builder » Creating a New User Interface » Adding Pages
Unless the controlled space is a single device, or a single lighting control remote, you will need to set up multiple pages and/or overlays for your user interface. Follow the steps below to create multiple pages to your new interface. Adding Pages Create an…
Adding Buttons
Use Cases » Adding Buttons
Buttons are the elements that the end user interacts with to control their Space. Buttons can be single actions, macros or navigational. This article explains how to add a new button to the user interface. Selecting the Relevant Page Launch into the Builder from…
Adding Background
Use Cases » Adding Background
Adding a background is the first step in customizing a setup. Any image can be used as a background image. This includes – company logos, customized imaging, team photos etc. This article explains how to add a background to your newly created pages. In the…
Adding a Slider
Use Cases » Adding a Slider
Sliders are used to control devices that have discrete capabilities for level control. Two examples of discrete level control would be: the volume level of an audio device and the dimming capability of a light. This article explains two options for adding a slider to…
Adding New Charts in Dashboard
Release Notes » v2.2.2 » v2.2.2 – Dashboard » Adding New Charts in Dashboard
Overview Kramer Control version 2.2 provides Dashboard users with more customization ability. One of these options is to Add charts to your Dashboard information screen. Follow the steps below to Add a New chart today! Process Open Dashboard Select the Project…
Failure to Save or Failure to Publish Message
FAQ » Failure to Save or Failure to Publish Message
Overview If you are seeing a popup message within the Builder indicating a Failure to Save or Publish try from the steps below to fix the Save or Publish issues you are experiencing Page Refresh Try a hard refresh of the page using Shift + Command/Control +…
How to: IFTTT Driver
Use Cases » How to: IFTTT Driver
Overview If This Then That – also known as IFTTT is a free web-based service that is available to create simple conditional statements called applets. What is an applet? An applet is a trigger caused by changes that occur within other web services such as…
KNX to IP Interfaces
Use Cases » KNX Lighting » KNX to IP Interfaces
Overview In order to integrate with KNX you will need a KNX to IP converter. Below is a list of models we know have been implemented with Kramer Control. If you have used a model other than what appears on this list, and it has worked well with Kramer Control please…
How to: Add Counter Function
Use Cases » How to: Add Counter Function
Overview Within this thread you will find the necessary steps to build a Counter/Timer function into your Kramer Control project. This thread includes an example scenario and the steps necessary to configure such a scenario within your project. Process Launch…
How to: Device Driver Basics
Kramer Control Videos » How to: Device Driver Basics
Device Driver Basics
How to: Use Generic Devices
Use Cases » How to: Use Generic Devices
Overview We have added Generic drivers to our database. These generic drivers will make it easier for the programmer to add custom commands to a project. These Generic drivers will not require the programmer to enter the Device Driver editor to add commands.…
How to: Sony Edge Analytics
Use Cases » How to: Sony Edge Analytics
Overview With the current version of Kramer Control (v2.9.0 or previous) we do not officially support the authentication requirement to implement control over the Sony Edge Analytics device. However, we can control the unit using a combination of our URL widget and…
How to: Align grouped items to the center of a Page or Overlay
Use Cases » How to: Align grouped items to the center of a Page or Overlay
Overview This tutorial will cover how to center a set of buttons both vertically and horizontally within your Pages and Overlays. Follow the steps below to easily center your widgets within your UI pages and Overlays. Process Launch Builder Add Widgets After you…
Importing Theme to Existing Project/Space
Release Notes » v1.1.0 » Manager » Importing Theme to Existing Project/Space
Overview The Project wizard allows the programmer to select a one or more themes when initially creating the Project within the Manager. If a New Theme is created, or another theme is wanted, follow the steps below to import new images. Process Within…
KUpload – Failure to Update message
FAQ » KUpload – Failure to Update message
Overview We have been notified of issues with the KUpload firmware update procedure. The issues that have been reported: Uploading through TCP there is a loss of connection to the SL device UDP timeout after minutes of uploading UDP update taking an inordinate…
Changing Frames to a Different Overlay
Use Cases » Changing Frames to a Different Overlay
You want to build a single page interface. To fit all the controls on one page, you need to add a frame to the page and then create a button that will enable the interface user to go the new frame from the main part of the page. This article explains how to create a…
How to: Use the Ping driver
Use Cases » How to: Use the Ping driver
Overview The Ping driver provides a method for the programmer and end user to check connectivity of a particular device. You can also check outbound status of the Brain by pinging hostnames of websites such as Google or the hostnames of our required ports. Follow the…
How to: Create a Phone book Overlay
Use Cases » How to: Create a Phone book Overlay
Overview The process below describes the setup requirements within Kramer Control to create a Virtual rolodex for DSP devices. Process Add Frame to Page If you have not yet created Frames and Overlays – You can find more information here The size…
How to: Frames and Overlays (Input Switching)
Kramer Control Videos » How to: Frames and Overlays (Input Switching)
Frames and Overlays
KT-1010 Kramer Control – Failed to Update
FAQ » KT-1010 Kramer Control – Failed to Update
Overview If you recently updated the firmware on a KT-1010 device and Kramer Control will not update please follow the steps below. The firmware version affected is Version 1.0.0.10.15v Process needed to Update Kramer Control Go to the settings of the…
How to: Control KDS-6 using Kramer Control
Kramer Control Videos » How to: Control KDS-6 using Kramer Control
How to: Adjust Slider range for controlled device
Use Cases » How to: Adjust Slider range for controlled device
Overview When a device driver is built for the database the State values match the possible range provided by the controlled device. This full range may not be used by the end user. Instead they may edit adjust the hardware to work within a set range providing a…
How to: Use SL Internal Clock without NTP Server
Use Cases » How to: Use SL Internal Clock without NTP Server
Overview When a Brain is installed in Offline Mode but you still need to execute commands based on time of day follow the steps below to make sure your installation works properly. Note This process requires a Publish to the Brain, the Brain will need to be Online to…
v1.2.5 Builder
Release Notes » v1.2.5 » v1.2.5 Builder
Failed to Publish when a single device is assigned to multiple gateway types When selecting UI layout and adding an overlay, it is added to the pages section instead of overlay section If a view item is greater than or equal to the width of the page, you can move…
Provisioning
Adding Brain Hardware to a Project » Provisioning
Brain hardware (see Adding Brain Hardware to a Project) must be provisioned (assigned) to a space before the Kramer Control application can control the devices in the space. This article explains how to provision Brain hardware to a controlled space. The provisioning…
802.1x Authentication
Security » 802.1x Authentication
Overview As installations become more secure there have been more requests for 802.1x for the Kramer Control Brain. If a system requires 802.1x authentication you will need to control your local Control Champion to arrange for a Kramer Control support technician to…
v2.0.7 Release
Release Notes » v2.0.7 Release
Overview The v2.0.7 release includes corrections for Manager, Builder, Brain and Client application. This release does include new Brain firmware files that can be updated remotely. More information on v2.0.x New Features can be found here Bug…
v2.2.9 – Patch Release
Release Notes » v2.2.9 – Patch Release
Overview We are excited to announce the patch release of v2.2.9 for Kramer Control. Below is a list of improvements and corrections we have made with this latest patch version. New Improvements Brain Added internal functionality to prevent Brains entering a boot…
Troubleshooting Checklist
FAQ » Troubleshooting Checklist
Overview If you run into an issue and you need to contact Kramer Control support to assist here is a checklist of items that the support technician will request: Overall description of issue Log file from Brain Project and Space ID’s Network…
Communication Method
Builder » Devices » Creating Device Driver » Communication Method
The communication method section of the Device Driver indicates the method in which commands are executed from the brain to the hardware. Each communication type has different settings that can be edited within the driver Infrared IR is the most basic of control…
Offline Publishing
Release Notes » v2.4 » v2.4 – Builder » Offline Publishing
Overview Offline publishing is a great tool to use when you have a Brain installed on a customer network that does not have WAN access to our Cloud servers. Instead of requiring new firewall rules, or temporary routers you can publish programming changes without…
Hardware Mismatch
FAQ » Hardware Mismatch
Overview The image on the right shows the error that appears within the Kramer Control application when the Provisioning process fails due to a Hardware Mismatch. There are a couple different causes for such a problem. The possible causes and fixes are listed below.…
Firmware Updating
Use Cases » Firmware Updating
This article explains the process of updating your Brain and Brain hardware. Included in this article are links to download the latest firmware and the tool for updating the firmware. Note: This process requires a PC, MAC computers are not supported for the upload…
Known Issues
Known Issues
Overview This page is dedicated to issues that we are currently aware of. They are broken out based on where they occur in the platform. If there is a known work-around it will listed as well. As we fix the issues we will update this list by removing fixed issues.…
Builder Updates
Release Notes » v1.1.0 » Builder Updates
New Features Added support for SL-240C brain type Added the ability to Group Images based on type when uploading multiple images Added Errors and Warnings toolbar to show issues within the builder Added support for multiple gateway types FC-21ETH Global…
VIA Connect Plus BRAINware
Adding Brain Hardware to a Project » VIA Connect Plus BRAINware
!Support for BRAINWARE in the VIA Connect Plus has been discontinued! Overview The VIA Connect Plus will have a VIA-BRAINware feature that will allow the installer to control the Space by purchasing smaller hardware options or controlling the space all IP if…
KC – BRAINware – Command Line Information
KC-Brainware Server Documents » Kramer Server Configuration for QA » KC – BRAINware – Command Line Information
Overview KC-BRAINware server hardware requires a different setup from our SL family of hardware. There is some command line requirement for the KC-BRAINware installation. Kramer Control Setup Within the Builder you will need to select the Docker – BRAINware…
Team Member Roles Matrix
Logging Into Kramer Control Portal » Inviting team members » Team Member Roles Matrix
Roles Matrix Below you will find the matrix indicating the abilities that exist within each role type C = The ability to create new content within the specified function R = Read only ability. This means the role can only see the content, no editing of any kind is…
Updated Dashboard
Release Notes » v2.10 » Updated Dashboard
Overview With the release of version 2.10, we have updated the look and function of the Kramer Control Dashboard. Below is a screenshot of what the updated landing screen shows when you open the new Dashboard. Theme Toggle We have added a button in the top right…
Cisco Touch 10 Integration
Use Cases » Cisco Touch 10 Integration
Overview The Cisco Touch 10 can be configured, within the Cisco software, for integration with 3rd party device control; such as Kramer Control. Once the Touch 10 has been configured in such a way, Kramer Control can use the feedback from the Touch 10 to execute…
Device Attributes
Builder » Devices » Creating Device Driver » Device Attributes
Attributes are defined per device. We have two options within the Device Driver editor; Allowing combined commands and enabling virtual states. Explanations for both can be found below. Combined Commands Some devices will support the ability to group multiple…
v1.1.0
Release Notes » v1.1.0
Brain Big Fixes Brain – Need maximum time for execution of Lua Code Brain – Unexpected Results for Macros when Device is Connected to Multiple CommTypes Brain – StateChangeCompleteCallback and PreventStateChangeDuringStateChange tests frequently cause segfaults…
Hardware
Builder » Hardware
Gateways are control units installed as hardware in your controlled space. These control units are required for devices that cannot be controlled over a Network and can only be controlled via IR (infrared) control, RS-232 serial control, Relay/IO contact closure and…
Use Cases
Use Cases
Overview Use cases are example scenarios that can be created when using Kramer Control. Found within this topic will be examples such as when to save vs when to publish, state based event that changes image to indicate current state and more Examples Adding…
Offline Mode
Release Notes » v1.2.0 » v1.2 Manager » Express Mode » Offline Mode
Overview In a scenario where the installation occurs in an environment with no Internet access, it is recommended to follow the steps below for best results. Process Provision Brain using the Client application Remove Brain from current Network and install onto…
v2.4.3
Release Notes » v2.4.3
Overview Patch release v2.4.3 improves Brain stability by lowering memory usage during publish events, improving error messages that have appeared in logs, removing API server queries to active_offline Brains, and more. Read below for more details on each of the…
2.10.9
Release Notes » 2.10.9
Overview Version 2.10.9 is an update to the Brain processing capabilities on the SL and KC Virtual Brain hardware. We have resolved a bug relating to CPU usage on the Brain hardware devices that we found to overwhelm the processing capabilities of the SL hardware.…
BRAINware: Sony Bravia Setup
Use Cases » BRAINware: Sony Bravia Setup
Overview Follow the steps below setup BRAINware on your Sony Bravia professional display. Will only work with Sony Bravia Pro BZ35F & BZ40H models only. Process Enable IP Control of the display Install ES File Explorer from the Google Play Store Insert USB…
Offline Mode Improvements
Release Notes » v2.0.3 » v2.0.3 – Client Applications » Offline Mode Improvements
Overview v2.0 included some changes to the way the Brain enters the Active state for endUser usage. Prior versions of the applications would go through a process to confirm Network access and could take upwards of 10 minutes for the Brain to enter this Active state…
2.10.10
Release Notes » 2.10.10
Overview 2.10.10 is a patch release to fix an issue with initialization macros from device drivers that were not executing on brain state changes. Bug Fix - We fixed an issue where initialization macros programmed within device drivers was not executed on brain…
v1.5.1
Release Notes » v1.5.1
Overview v1.5.1 includes a new gateway, and new event types along with bug fixes. More information on these new features and what bugs were fixed can be found in the links below. Brain New Features New notifications have been added to the Manager, Builder and…
Builder Interface Overview
Builder » Builder Interface Overview
This article introduces you to the Builder interface. Click one of the bullet headings to go to a step by step article on the selected topic. Left Pane “UI”: – the graphic layout that is viewed by your end user. You configure the user…
Latest Release
Release Notes » Latest Release
Latest Release Version 2.10.10 of Kramer Control is a Brain fix relating to initialization macros of the device drivers on both SL and KC Virtual Brain hardware. More information on 2.10.10 can be found here KC Server Brains If you have a KC Brainware 5/25/50 unit…
v2.0.11 Patch Release
Release Notes » v2.0.11 Patch Release
Overview The version 2.0.11 release of Kramer Control includes fixes to the Brain and Client Applications. More information on the fixes included below. For more information on version 2 of Kramer Control click here Bug Fixes Brain Corrected issue where Weather…
BRAINware Update Process
FAQ » BRAINware Update Process
Overview BRAINware devices cannot be remotely updated at this time. In order to update BRAINware on a KT-107 you will need to download the application from the Google Play store. If you cannot download the application from the Play Store, which we do recommend, you…
KC-Brainware Bridge Networking
KC-Brainware Server Documents » KC-Brainware Quick Start Guide » KC-Brainware Bridge Networking
Overview !This only refers to original KC Brainware installations. This is not compatible with the KC Virtual Brain product. After reviewing installations of the KC Brainware 5/25/50 units in the field, we have seen easier installations on all networks when Bridge…
Dark Web Socket – Troubleshooting
Use Cases » Dark Web Socket – Troubleshooting
Overview The Dashboard Livestream is a good tool for programmers. The Livestream shows communication that is traveling to and from the Brain in live to the second time. What happens if the Brain stops responding? What is you want to see the exact details being sent to…
Offline Unprovisioning using Kramer UI
Release Notes » v2.5.0 » Offline Unprovisioning using Kramer UI
Overview With the release of v2.5.0 programmers can now unprovision a Brain that is not connected to WAN. By creating a code within the Manager you can enter this code within the Kramer UI to unprovision a Brain without WAN access. Follow the steps below to…
v2.6.0
Release Notes » v2.6.0
Overview Version 2.6.0 of Kramer Control is now available. This version improves reliability and overall stability of the Kramer Control system. We have also added new gateways and added functionality to the Zoom Rooms widget for camera control. Check out more details…
Online Provisioning using Kramer UI
Release Notes » v2.5.0 » Online Provisioning using Kramer UI
Overview With the release of 2.5.0 programmers can now provision Brains that are connected to WAN, but by using the Kramer UI webpage. If you are not familiar with the Kramer UI webpage, click here This new feature means that the programmer no longer is required to…
KC-Brainware Quick Start Guide
KC-Brainware Server Documents » KC-Brainware Quick Start Guide
!If you are installing a KC Virtual Brain 1 or 5, these articles below will not work with the Virtual Brain hardware. Setup Process followed in Quick Start Guide for KC-BRAINware Server Units The below steps will be shown in the Quick Start guide that is shipped…
Tablet – BRAINware
Use Cases » Tablet – BRAINware
Overview Tablet – BRAINware is the use of the KT-107 or KT1010 device to act as your Brain for the controlled space. The Tablet – BRAINware installed within the KT-107 or KT1010 does not include I/O but can be used to control smaller hardware options and…
v1.3.3 Client
Release Notes » v1.3.3 » v1.3.3 Client
Overview Below are items corrected with the release of v1.3.3 Bug Fixes Fixed issue in iOS clients where the First image was repeated when the button was set to a toggle button Fixed issue with KT-107 where the application would crash upon syncing an Unpublished…
v2.4.1
Release Notes » v2.4.1
Patch Fix v2.4.1 Version 2.4.1 includes a couple improvements to the Kramer Control platform. In this patch we have added the capability to control KNX HVAC systems and we have improved the Kramer UI to add more functionality. This patch release also makes corrections…
Operating System Requirements
Use Cases » Operating System Requirements
Below you will find the minimal requirements necessary for using Kramer Control. All Kramer related Programming should be done using a Google Chrome browser Note – Make sure pop-ups are allowed for the Kramer Control websites. Opening Manager, Builder, and…
Kramer Server Configuration for QA
KC-Brainware Server Documents » Kramer Server Configuration for QA
Overview The below process explains how QA should test a Gamma environment on KC-BRAINware5, KC-BRAINware25, and KC-BRAINware50 server units. This process will require two separate machines: personal laptop running linux or Mac OS and the KC-BRAINware hardware running…
v2.8.0
Release Notes » v2.8.0
Overview Version 2.8 of Kramer Control is a single focus on improving stability of the Kramer Control solution. Our team has done a great job at identifying root issues that have affected Brain stability on SL hardware and issues with the Kramer Control client…
v2.4
Release Notes » v2.4
Overview We are excited about the release of version 2.4.1 of Kramer Control. With this release we have included the new method for offline publishing to Brains that installed in environments without WAN access. We have also released new BRAINware that will run on…
Glossary
Glossary
Manager A home destination for all projects, spaces and controlled spaces. The manager is a single sign-in area that includes all of your installations. Project A Kramer control installation that includes as much specific details as possible for each project…
FAQ
FAQ
Links Brain Information Brain Tips Un-Provisioning, What we recommend Minimum System Requirements Firmware Update Process Project/Space ID’s Incorrect Time appearing within Brain Copy and Paste of Devices Failure to update when using KUpload Builder Page…
v2.2.7 Patch Release
Release Notes » v2.2.7 Patch Release
Overview The version 2.2.7 release of Kramer Control includes fixes to Brain, Builder, Manager, Client Applications and Dashboard. More information on the included fixes can be found below. We have improved loading times for all elements that load the Project list.…
New API Information in Web Client
Release Notes » v2.0.3 » v2.0.3 – Client Applications » New API Information in Web Client
Overview With the release of v2 of Kramer Control we have added more information to the /api/vtest/general URL of the Brain. Below is a screenshot and explanation of the new information that can be found Process Open Chrome Go to…
v2.5.0
Release Notes » v2.5.0
Version 2.5.0 This new version includes new features such as a Zoom Room widget, SSH communication type, and Offline provision & unprovisioning. This release also includes bug fixes to improve stability with both online and offline Brains. More information on the…