Search
Related topics are listed below.
v1 Deep Linking
Release Notes » v2.7.0 » v1 Deep Linking
Overview With version one of deep linking, the programmer can create and send specific URL’s that will direct the end user to a specific Interface and page within that interface. This feature can be used with QR readers and embedded links within other…
v1 Calendar Integration
Release Notes » v2.0.3 » v2.0.3 – Builder » v1 Calendar Integration
Overview Kramer Control now includes Calendar integration with Google Suite and Microsoft Exchange. Following the process listed below, you will be able to add Meeting information including Time and Date to your Kramer Control Interface. !NOTE – We recommend…
v1.2.5 Clients
Release Notes » v1.2.5 » v1.2.5 Clients
iOS Clients lose communication with Brain when sleep mode is enabled on the device iOS/Android Clients crash due to multiple navigations from one page to another Android client crash when hitting back from within user interface iOS Clients crash when returning the…
v1.3.1 Clients
Release Notes » v1.3.1 » v1.3.1 Clients
Overview If you have installed a KT-107 and purchased a license you can now use our new Tablet – BRAINware function. The link below describes the feature in more detail. Also, listed below are the bug fixes included with the release of v1.3.1 Tablet –…
v1.5.1 Clients
Release Notes » v1.5.1 » v1.5.1 Clients
Overview Below you will find the list of items corrected with the release of v1.5.1 Bug Fixes Corrected issue in Android client where changing orientation of UI within Builder does not change the orientation of the UI within the Client after publish Corrected…
Kramer KDS 3 & Kramer Control
Use Cases » Kramer KDS 3 & Kramer Control
Overview KDS 3 units are h.264 encoders built for HDMI signals up to 1080p60. Kramer Control can control the Encoders and Decoders that have been installed by following the process below. KDS 3 Software Before configuring the Kramer Control builder for control of…
v1.3.3
Release Notes » v1.3.3
Overview Version 1.3.3 is a patch release to fix bugs that were identified within the release of version 1.3.1. Below you will find a list of Bugs that were fixed with this patch release. Manager Builder Client Application Dashboard Brain Fixed issue where lost…
v1.3.1
Release Notes » v1.3.1
Overview Version 1.3.1 of our software adds new functionality to the Kramer Control Manager as well as bug fixes to the entire system. Manager Builder Clients Tablet – BRAINware – BRAINware} Modifications Un-provision Space is now available within…
v1.2.5
Release Notes » v1.2.5
Overview Version 1.2.5 of our Software is a release that includes only bug fixes and updates. This release does not include new features. Builder Manager Clients Device Driver Editor Dashboard Brain Fixes Daylight savings time not factored correctly Repeated…
Release Notes
Release Notes
Version History 2.10.5 2.10.4 2.10.3 2.10.2 2.10.0 2.9.0 2.8.0 2.7.0 2.6.3 – Hot…
v1.4.3
Release Notes » v1.4.3
Overview The v1.4.3 is primarily a release to correct bugs that have existed within the Kramer Control environment. The links below detail what bugs were fixed for each of the Kramer Control functions. Brain Fixes Corrected issue with WOL device failing to…
v1.5.1
Release Notes » v1.5.1
Overview v1.5.1 includes a new gateway, and new event types along with bug fixes. More information on these new features and what bugs were fixed can be found in the links below. Brain New Features New notifications have been added to the Manager, Builder and…
K-Agent Setup using Kramer Control
New Kramer Tablets » K-Agent Setup using Kramer Control
Overview The K-Agent application can be setup using a device driver within Kramer Control. This driver is available in our database and can be used to remotely restart a tablet, check if the tablet is online, or to configure the deep link address for the Control…
Brain API Commands
FAQ » Brain API Commands
Overview Through Terminal or another CLI interface you can send Curl commands to the Brain. You can also use Postman to send PUT commands, but this thread only focuses on the Curl commands via CLI. Commands NOTE In the below commands, you will need to replace…
Logging Into Kramer Control Portal
Logging Into Kramer Control Portal
Follow this link to access the Kramer Control Portal If you have not yet requested your Kramer Control account, you will need to register through the Kramer Control portal. Upon registering you will be granted a 14 day trial of the software. If you do not complete the…
v2.0.3 – Builder
Release Notes » v2.0.3 » v2.0.3 – Builder
Overview With the release of Kramer Control v2.0 we have included many new features within the Kramer Control Builder. Those features and a list of bug fixes can be found below. Follow the links to learn more about these new feature we have added! New Features v1.0…
New Kramer Apk
New Kramer Apk
Overview The new Kramer apk will eventually replace the Kramer Control apk, but for now it is a secondary Kramer application that runs as an agent on the iOS and Android devices. In order to get the new apk installed, you will need to understand the following…
DirecTV Genie Client Control
Use Cases » DirecTV Genie Client Control
When controlling a DirecTV Genie client system, the Genie clients operate through the main Genie DVR unit’s IP address. In this article we explain the builder setup for controlling 2 clients through a single Genie DVR. Information you need to know: IP…
Brain Tips
FAQ » Brain Tips
If your brain malfunctions there are a couple URL’s you will want to know in order to verify status and download log files. General Status Enter IP address of brain followed by :8000/api/vtest/general 192.168.1.15:8000/api/vtest/general You will see a…
Web URL Widget
Release Notes » v2.2.2 » v2.2.2 – Builder » Web URL Widget
Overview The URL widget allows the programmer to create a user inter actable screen within the Kramer Control UI. This widget will open most webpages on Android and iOS clients. If you are using the web client directly via the Brains IP address :8000 you will not be…
v2.0.3
Release Notes » v2.0.3
Overview We are excited to release v2.0 of Kramer Control! New features included in this release are: Calendar support, Timer Functionality, and more! More information can be found on these features and more by following the links below. Manager Builder Client…
User Input Function
Release Notes » v1.2.0 » v1.2.0 Builder » User Input Function
Overview Devices such as Cable boxes, Video Conferencing units may require end user Input to identify an alphanumerical string such as phone number or favorite channel. In prior versions of Kramer Control, the programmer needed to identify these strings and program…
Kramer Control – tablet setup from laptop
New Kramer Tablets » Kramer Control – tablet setup from laptop
Overview On the new model Kramer tablets, the programmer can configure the tablets directly from their laptop without having to input any information within the tablet itself. Process To get the new apk to show the Kramer Control GUI of a Brain, open a Chrome…
KC-Brainware Bridge Networking
KC-Brainware Server Documents » KC-Brainware Quick Start Guide » KC-Brainware Bridge Networking
Overview !This only refers to original KC Brainware installations. This is not compatible with the KC Virtual Brain product. After reviewing installations of the KC Brainware 5/25/50 units in the field, we have seen easier installations on all networks when Bridge…
IFTTT – Email Example Setup
Use Cases » How to: IFTTT Driver » IFTTT – Email Example Setup
Overview If you have not read the previous article on IFTTT and setting up applets make sure that you read the article in its entirety before following the steps below. Kramer Control and IFTTT IFTTT and Webhooks create a method in which a Kramer Control programmer…
v2.5.0
Release Notes » v2.5.0
Version 2.5.0 This new version includes new features such as a Zoom Room widget, SSH communication type, and Offline provision & unprovisioning. This release also includes bug fixes to improve stability with both online and offline Brains. More information on the…
Toggle Button
Use Cases » Toggle Button
This article explains how to create a single toggle button that performs different actions and changes appearance for each action. Adding Multiple Actions to a Button Launch the Builder. Add a new button or select an existing button from the interface. Select…
Tablet – BRAINware
Use Cases » Tablet – BRAINware
Overview Tablet – BRAINware is the use of the KT-107 or KT1010 device to act as your Brain for the controlled space. The Tablet – BRAINware installed within the KT-107 or KT1010 does not include I/O but can be used to control smaller hardware options and…
Update Property
Builder » Actions Menu » Update Property
Update Property enables changing a property of and interface element. Updating a Property In the Builder, double-click the relevant interface element. Select the required button action. For example: Tap, Press or Release. (Update Property works for all of these…
Image Library UI Change
Release Notes » v1.1.0 » Manager » Image Library UI Change
Overview The Manage Image Library section found within the Manager and Builder have been updated to match the look and feel of the Kramer Control solution. Below you will find the new details on the Manage Image library window. Manage Image Libraries Left Pane…
Importing Grouped Images
Release Notes » v1.1.0 » Manager » Image Library UI Change » Importing Grouped Images
Overview Multiple State images are a feature that allows the programmer to show different actions while interacting with a widget. The programmer now has the ability to adjust the file name of the image within their machine to speed up the image upload. By using the…
v1.4.3 Client
Release Notes » v1.4.3 » v1.4.3 Client
Overview Below you will find a list of items corrected with the release of v1.4.3 Fixes Corrected issue where X, Y coordinates within an Update Property were not changing within Client applications Corrected issue with iOS application where the application was…
v1.2 Manager
Release Notes » v1.2.0 » v1.2 Manager
New Features Upon adjusting Project/Space Information the Brain will be updated. Prior the v1.2, you would have needed to access the Space and publish changes to the Brain. NOTE Upon saving these changes, the Clients will enter a sync mode to implement the saved…
Project or Space Duplication
Logging Into Kramer Control Portal » Manager » Project and Space Menu Options » Project or Space Duplication
Project or Space duplication uses your prior work to create a new setup. The duplicated setup contains the same settings and configurations of the original and enables adjusting previous settings and removing unused features that were in the original.There is no need…
v2.10
Release Notes » v2.10
Overview Version 2.10 of Kramer Control focuses on updates for the Kramer Control Dashboard. The Dashboard has been redesigned and now includes alerts, room statuses, and email notifications based on alerts. The majority of changes are done within the webpages for…
v1.3.3 Client
Release Notes » v1.3.3 » v1.3.3 Client
Overview Below are items corrected with the release of v1.3.3 Bug Fixes Fixed issue in iOS clients where the First image was repeated when the button was set to a toggle button Fixed issue with KT-107 where the application would crash upon syncing an Unpublished…
v2.7.0
Release Notes » v2.7.0
Overview Version 2.7 of Kramer Control is intended to improve overall stability with our Brains, our Device Drivers and Zoom Rooms. Also included in this release is a new feature called Deep Linking which allows you to use a URL to open a specific interface and page…
Displaying System Device Information
Use Cases » Displaying System Device Information
The System Device appears in the Devices tab in each Space. The System Device consists of information including: Time, Date, Weather and System State. You can use the System Device to track when the system is on or off, or you can add the time/date to your interface.…
Custom UI Ratio
Release Notes » v1.3.1 » v.1.3.1 Builder » Custom UI Ratio
Overview With the release of v1.3.0 programmers now have the ability to create a Custom Handset ratio. As more devices are released, the standard ratios 16:9 and 4:3 do not cover the devices on the market. By building a Custom UI you can create the correct UI to match…
v2.0.7 Release
Release Notes » v2.0.7 Release
Overview The v2.0.7 release includes corrections for Manager, Builder, Brain and Client application. This release does include new Brain firmware files that can be updated remotely. More information on v2.0.x New Features can be found here Bug…
Builder Toolbar
Builder » Creating a New User Interface » Builder Toolbar
Within the center pane you will find the Builder Tool bar. This article provides a brief explanation of each tool found within the toolbar. Clicking on the header of the topic will link to a separate article with further explanation of the feature. Zoom The first…
v2.0.11 Patch Release
Release Notes » v2.0.11 Patch Release
Overview The version 2.0.11 release of Kramer Control includes fixes to the Brain and Client Applications. More information on the fixes included below. For more information on version 2 of Kramer Control click here Bug Fixes Brain Corrected issue where Weather…
v1.5.5
Release Notes » v1.5.5
Overview v1.5.5 includes new features inside the Builder and within the Device Driver Editor. This release also includes bug fixes within the Builder, Device Driver Editor and Dashboard. You can find out more information on these new features and bug fixes within the…
Timer Function
Release Notes » v2.0.3 » v2.0.3 – Builder » Timer Function
Overview Within the release of v2.0, we have added a Timer functionality within the System Device driver that exists within each programmed space. This Timer function can be used within Events to trigger Actions such as Macros, Update Properties or Navigation. Follow…
v2.2.5 Patch Release
Release Notes » v2.2.5 Patch Release
Overview The version 2.2.5 release of Kramer Control includes fixes to the Brain, Builder and Client Applications. More information on the fixes included below. For more information on version 2 of Kramer Control click here Bug Fixes Brain Corrected issue where…
Creating a Repeat on Hold Button
Use Cases » Creating a Repeat on Hold Button
There are two types of interface buttons. One type performs an action once per click and release. The other type of button repeats an action as long as the button is held and stops repeating when released. This is called a Repeat on Hold button. Examples of Repeat on…
v.1.3.1 Builder
Release Notes » v1.3.1 » v.1.3.1 Builder
Overview Version 1.3.1 of Kramer Control focuses primarily on adding new feature to the Manager. Within the Builder we have corrected the Bugs listed below. Custom Interface Ratios v1.3.0 includes the ability to create a custom interface ratio in the builder. Follow…
System Device – Weather Conditions
Use Cases » System Device – Weather Conditions
Overview Our System Device found within the Builder includes a Weather category that can be used to track the current conditions in your area. Many users will want to use those states to execute Events such as turning the lights on during a cloudy day. The full…
Provisioning
Adding Brain Hardware to a Project » Provisioning
Brain hardware (see Adding Brain Hardware to a Project) must be provisioned (assigned) to a space before the Kramer Control application can control the devices in the space. This article explains how to provision Brain hardware to a controlled space. The provisioning…
How to: Use the Ping driver
Use Cases » How to: Use the Ping driver
Overview The Ping driver provides a method for the programmer and end user to check connectivity of a particular device. You can also check outbound status of the Brain by pinging hostnames of websites such as Google or the hostnames of our required ports. Follow the…
How to: Adjust Slider range for controlled device
Use Cases » How to: Adjust Slider range for controlled device
Overview When a device driver is built for the database the State values match the possible range provided by the controlled device. This full range may not be used by the end user. Instead they may edit adjust the hardware to work within a set range providing a…
Creating interactive dialer for Video and Tele conferencing systems
Use Cases » Creating interactive dialer for Video and Tele conferencing systems
Devices such as Polycomm, Cisco and Lifesize will allow the end user to input their own dial strings to execute calls. This thread explains the proper setup to ensure that end user interaction matches the use of the physical hardware. Steps necessary prior to…
SL-280 Errors
FAQ » SL-280 Errors
Overview Below is a list of error indicators and solution to correct the issue Errors Serial Tx 2,4 and IR Port 8 Illuminated If the transmit lights on serial ports 2 and 4 are illuminated and IR port 8 is also illuminated you have an issue with a jumper is not…
Hardware
Builder » Hardware
Gateways are control units installed as hardware in your controlled space. These control units are required for devices that cannot be controlled over a Network and can only be controlled via IR (infrared) control, RS-232 serial control, Relay/IO contact closure and…
Updating Brain Firmware
FAQ » Updating Brain Firmware
Follow the steps below to update the firmware on the brain hardware. This only affects the brain, this will not update the firmware on the hardware unit itself. Process Download KUpload Click here to find the latest KUpload version Download the latest Brain…
Converging Systems Shade & Screen Control
Use Cases » Converging Systems Lighting and Screen Control » Converging Systems Shade & Screen Control
Overview Kramer Control has the ability to control the IMC-100C/BRIC and IMC-100T Motors via Network gateway communicating via Port 23 of your Network. The steps below explain how to import the proper device and create an Interface layout to control these motors.…
Align and Spread
Builder » Creating a New User Interface » Builder Toolbar » Align and Spread
Adding multiple elements such as buttons, sliders,and list boxes to a page can create disarray. Dragging and dropping each items is easy, but keeping them organized is not. the Align and Spread tools help you to organize your page elements. Follow the steps in this…
Programming Phillips Hue with Kramer Control
Use Cases » Programming Phillips Hue with Kramer Control
Overview In order to control your Philips HUE device, there are some initial steps that need to be taken outside of the Kramer Control builder to properly implement control. Follow the steps below to control your Philips HUE lights. Process In order for commands…
Adding Buttons
Use Cases » Adding Buttons
Buttons are the elements that the end user interacts with to control their Space. Buttons can be single actions, macros or navigational. This article explains how to add a new button to the user interface. Selecting the Relevant Page Launch into the Builder from…
Creating User Interface Elements
Builder » Creating a New User Interface » Builder Toolbar » Creating User Interface Elements
The Create Interface Element button in the Builder toolbar has five options for creating new elements on a page. This article explains each of the five options. Click the link at the end of each section for more information about that section. Creating a…
KNET – Dashboard extension
Use Cases » KNET – Dashboard extension
Overview This is an internal Kramer document. This is not to be shared with anyone outside a Kramer office. This process explains how to extend Dashboard licensing using KNET. Note – You will need the Project ID of the customers projects that you are adding…
Using WOL command
Use Cases » Using WOL command
What is WOL? WOL or Wake on Lan is supported by some devices as a method to Power on the unit via the lan connection to the unit. Devices such as Kramer VIA, Sony Blu-ray and Sony TV’s require WOL as the only way to Power the unit on while controlling the…
Offline Mode
Release Notes » v1.2.0 » v1.2 Manager » Express Mode » Offline Mode
Overview In a scenario where the installation occurs in an environment with no Internet access, it is recommended to follow the steps below for best results. Process Provision Brain using the Client application Remove Brain from current Network and install onto…
Brain showing incorrect time
FAQ » Brain showing incorrect time
Overview If you Brain is showing the incorrect time within your User Interface, there is a workaround to correct this issue. This has become more prominent since Daylight Savings Time occurred. Process Open Manager and Select Project Change Project Location to…
Firmware Updating
Use Cases » Firmware Updating
This article explains the process of updating your Brain and Brain hardware. Included in this article are links to download the latest firmware and the tool for updating the firmware. Note: This process requires a PC, MAC computers are not supported for the upload…
Converging Systems Lighting and Screen Control
Use Cases » Converging Systems Lighting and Screen Control
Overview The Converging Systems lighting controller has many options for configuration within the Kramer Control Builder. Below are some of those features and how to properly setup Kramer Control with your Converging Systems hardware. These steps must first be…
Navigation
Builder » Creating a New User Interface » Navigation
Overview Adding navigation to the user interface is necessary to enable the user to access a prior page or a separate control page for devices. For example, a Home page with macros for turning on a system to an Apple TV device. Once the macro finishes, you will want…
KT-1010 – In field updating
KT-1010 » KT-1010 – In field updating
!This article is ONLY needed if you have a device that was shipped to you prior to September 17th 2020. In order to fix the issue with Google Play issues on the KT-1010, KT-1010SC & KT-1010RB the following steps will need to be followed to remove the dependency on…
Kramer RC Keypad Integration
Use Cases » Kramer RC Keypad Integration
Overview The Kramer RC keypad can be integrated to a Kramer Control setup. The Volume knob and buttons on the keypad send out feedback upon use and Kramer Control Events can turn that feedback into Control for third-party equipment. Follow the steps below to integrate…
Offline Mode Improvements
Release Notes » v2.0.3 » v2.0.3 – Client Applications » Offline Mode Improvements
Overview v2.0 included some changes to the way the Brain enters the Active state for endUser usage. Prior versions of the applications would go through a process to confirm Network access and could take upwards of 10 minutes for the Brain to enter this Active state…
Kramer VS-622 DT – Pass through Control
Use Cases » Kramer VS-622 DT – Pass through Control
Overview The Kramer VS-622DT device provides the capability to tunnel RS232 commands through the HDBT port of the unit. This feature is beneficial for programmers using Kramer Control and the VS-622DT device. Follow the steps below to use this feature in your…
New Tablet – Application and Firmware Updating
New Kramer Tablets » New Tablet – Application and Firmware Updating
Overview The new model Kramer tablets will automatically download the latest updates via the cloud. If you prefer not to have auto updated applications, you can remove the URL from the firmware field of the application or firmware update fields of the settings.…
New Tablet – Changing time for auto updates
New Kramer Tablets » New Tablet – Changing time for auto updates
Overview The new Kramer tablets will attempt to automatically update the firmware or applications for Kramer Control at midnight. If you would prefer a different time, this can be changed following the steps below: Process Step 1 – Open settings on the…
Re-Assign Ownership
Logging Into Kramer Control Portal » Inviting team members » Re-Assign Ownership
How to re-assign ownership. Within this thread you will learn how to assign ownership of a project to a different team member. Process Login to the dealer portal Select the project to change from the left pane Select the option to Reassign Ownership from right…
Docker Brain Setup
KC-Brainware Server Documents » Kramer Server Configuration for QA » Docker Brain Setup
Overview This thread discusses the Command Line setup necessary to run a Docker Brain on your machine or Kramer Server. Below we have listed the steps necessary to complete the setup as well as system requirements your device will need to run the Docker Brain.…
Creating UI lock
Use Cases » Creating UI lock
UI Lock In a scenario where you want to restrict end user access to an area within the user interface, such as a page or overlay, you can create a lock code using a system lock device. In this tutorial we will explain the necessary setup for restricting end user…
v1.2 Portal
Release Notes » v1.2.0 » v1.2 Portal
Overview With the release of v1.2 there has been some changes to the Dealer Portal Details section. Dashboard Details After selecting a Project from the Left pane, there is a new Detail section found in the lower Right Pane. Information included: Copy Project…
KT-1010 Kramer Control – Failed to Update
FAQ » KT-1010 Kramer Control – Failed to Update
Overview If you recently updated the firmware on a KT-1010 device and Kramer Control will not update please follow the steps below. The firmware version affected is Version 1.0.0.10.15v Process needed to Update Kramer Control Go to the settings of the…
Events
Builder » Events
Events are scheduled actions that occur when certain conditions are met. The conditions are created within the Kramer Control Builder. Examples of conditions are: Time of Day and the Status of another device in the controlled space. This article explains how to…
ClearOne Converge Pro 2
Use Cases » ClearOne Converge Pro 2
Overview This article covers the required setup when programming the User Interface to interact with the ClearOne Converge Pro 2 hardware. This article covers What device to import Aliasing of Channel Names Using the Dialer Gateway Setup Process Launch…
Changing Sync settings within Brain
Release Notes » v2.2.7 Patch Release » Changing Sync settings within Brain
Overview We have found that some installations have Networks where the WAN connection is inconsistent. Some Brains will drop the WAN connection temporarily, but upon reconnecting the Brain is entering into a Synchronizing state. Depending on the size of the Project,…
Space Overrides
Release Notes » v1.3.1 » v.1.3.1 Manager » Space Overrides
Overview In a typical situation, Space References will reuse User Interface setup which includes: Design layout, controlled devices, brain type and macros for control. If the Spaces are installed on the same Network, you will have to configure the Referenced space…
Kramer Control – new tablet setup from tablet
New Kramer Tablets » Kramer Control – new tablet setup from tablet
Overview The Kramer Control setup on the new model, KT-208 & KT-2010, is different from previous versions of Kramer Control. If you intend on setting up the connection between the touch panel and the Brain from the tablet itself, follow the steps below: Process Step…
Required Internet Ports
Security » Required Internet Ports
Internet Ports Below you will find the ports necessary for communicating with the Kramer Control servers. If your network has any restrictions on these ports you may run into issues with saving, publishing, control, remote access or dashboard events. All traffic…
KT-1010 Imaging Process
KT-1010 » KT-1010 Imaging Process
This document will walk you through the steps necessary to flash the firmware on the KT-1010. *This update process requires a Windows PC and has been tested on Windows 10. Required Downloads These files should be downloaded as they will be used in the steps below to…
KT-1010RB Imaging Process
KT-1010 » KT-1010RB Imaging Process
This document will walk you through the steps necessary to flash the firmware on the KT-1010RB. *This update process requires a Windows PC and has been tested on Windows 10. Required Downloads These files should be downloaded as they will be used in the steps below…
KT-1010SC Imaging Process
KT-1010 » KT-1010SC Imaging Process
This document will walk you through the steps necessary to flash the firmware on the KT-1010SC. *This update process requires a Windows PC and has been tested on Windows 10. Required Downloads These files should be downloaded as they will be used in the steps below…
KT-1010SCRB Imaging Process
KT-1010 » KT-1010SCRB Imaging Process
This document will walk you through the steps necessary to flash the firmware on the KT-1010SCRB. *This update process requires a Windows PC and has been tested on Windows 10. Required Downloads These files should be downloaded as they will be used in the steps…
Parameters
Builder » Devices » Creating Device Driver » Parameters
A parameter is a term used to describe a section or sections of a command that are user editable within the Builder. Within this thread we will discuss how to build parameters within the Device Driver Editor. Note Parameters include, but are not limited to, Zones,…
Devices
Builder » Devices
Devices are the backbone of a successful Project installation. Importing the correct device driver and using the proper capabilities ensures a successful installation. This article explains the correct ways to search for a device and how to use a Capabilities and…
States
Builder » Devices » Creating Device Driver » Categories » Icon List » States
States are used to identify current information about the device. States include Power, Volume, Mute, Source and more. Below you will find the necessary information to setup states within a device driver. State Type User Facing Name This value represents…
Offline Publishing
Release Notes » v2.4 » v2.4 – Builder » Offline Publishing
Overview Offline publishing is a great tool to use when you have a Brain installed on a customer network that does not have WAN access to our Cloud servers. Instead of requiring new firewall rules, or temporary routers you can publish programming changes without…
Use Cases
Use Cases
Overview Use cases are example scenarios that can be created when using Kramer Control. Found within this topic will be examples such as when to save vs when to publish, state based event that changes image to indicate current state and more Examples Adding…
FAQ
FAQ
Links Brain Information Brain Tips Un-Provisioning, What we recommend Minimum System Requirements Firmware Update Process Project/Space ID’s Incorrect Time appearing within Brain Copy and Paste of Devices Failure to update when using KUpload Builder Page…
Kramer Control Videos
Kramer Control Videos
Videos Device Driver Basics Frames and Overlays Input Buttons Mute Buttons Password Locks Power off Popup Volume Buttons
KT-1010
KT-1010
Table Of Contents KT-1010 In-Field Updating Using the KramerAppUpdate apk Using the KT-1010 – Settings, Tips & Tricks KT-1010 Imaging Process KT-1010RB Imaging Process KT-1010SC Imaging Process KT-1010SCRB Imaging Process
KC-Brainware Server Documents
KC-Brainware Server Documents
!If you are installing a KC Virtual Brain 1 or 5, these articles below will not work with the Virtual Brain hardware. Reformatting seed unit Quick Start Guide Bridge Networking WAN Necessary KC-Brainware CLI Commands KC-Brainware Logs
v2.2.2
Release Notes » v2.2.2
Overview Version 2.2 of Kramer Control is now available. We are excited to announce some new features, updates to our Dashboard and some bug fixes as well. More information on version 2.2 can be found by following the links below Builder Brain Dashboard Client…
How to: IFTTT Driver
Use Cases » How to: IFTTT Driver
Overview If This Then That – also known as IFTTT is a free web-based service that is available to create simple conditional statements called applets. What is an applet? An applet is a trigger caused by changes that occur within other web services such as…