Part III: Manage INSiGHT Bridge

Synapse INSiGHT Bridge mode is available for Clients who use a version of Synapse that operate with a microcomputer called the INSiGHT Bridge. The Bridge is used with older versions of wireless INSiGHT technologies to allow access Synapse scanning and in offices that require special networking considerations.

The Manage INSiGHT Bridge Section under Synapse allows you to:

• View the status of your INSiGHT Bridge(s):
  • To view the status of your INSiGHT Bridge(s) An “active” button with the office name beside it, will turn to blue when the Bridge is active and connected (Fig. 1).
• View the status of your available and paired INSiGHT Scanning Technologies
  • To view the status of your available and paired INSiGHT Scanning Technologies, a blue check mark under each instrument icon indicates that the instrument is paired (Fig. 2).
    • Note: An instrument that is not paired will not show up as an option when starting an exam. Any currently paired instruments are listed with their MAC (Media Access Control) addresses.
• Manage your existing INSiGHT Bridge by clicking manage from the main screen (Fig. 3):
  • Rename the Bridge
  • Switch WiFi
  • Add instruments
  • Sync your neuroTHERMAL

Fig. 1

Fig. 2

Fig. 3