The Wireless EMG scanner (neuroCORE) uses an internal battery identical to the Wireless neuroTHERMAL. This cable has an RCA style jack on one end, which plugs into the device and a USB plug on the other. Charge the unit by plugging the RCA jack into the unit and the USB plug into a PC that is turned on or an appropriate charger that has been confirmed to work with the equipment.
DO NOT PLUG IN THE EQUIPMENT TO A WALL CHARGER THAT ACCEPTS A USB CABLE.
While it is plugged in, the unit’s screen will show “Charger Attached” and the battery level will appear at the bottom of the screen.
Because of its touchscreen, the battery on the neuroCORE does not last as long as the one on the Wireless neuroTHERMAL. Turn it off between scans and plug it into the charger every evening to recharge completely.