1. Securely connect the mains cable to the projector and to a mains outlet. When connected, the Power LED will turn red.
  1. Connect a signal/source cable to a source device and the projector.
  1. Remove the lens cap.
  1. Press the Power button on the keypad or the the symbol on the remote control.

The InFocus startup screen will appear after approximately 10 seconds. The Power LED will flash blue and then steady blue.

ATTENTION

Make sure that people cannot step on any electrical cables or trip over the cables. Do not put objects on the cables.

Need more help with this?
InFocus Support

Thanks for your feedback.