5.1.5. SIGNAL SOURCE SWITCHING

You can use the remote control or touch function to switch the source by the following methods:

Method one:
• Press the icon in the upper right side of the screen that looks like a laptop screen with arrows (fig.1)
• Select the signal source and then the product will switch to the input signal source you selected.

Method two:
• Press the “Input” key on the remote controller to open the “Input mode menu”
• Press the cursor keys on the remote control to select a signal source
• Press the“OK” key, and then the product will switch to the input signal source that you selected.

Method three:
• Swipe up from the bottom of the screen to open the “input” menu (see below image)
• Select the signal source and then the product will switch to the input signal source you selected.