Display

INFORMATION

Zoom has a total of 30 step adjustment, each step representing 0.04x adjustment from -0.8 to 2.0x
Brightness Power, each step represents 5% power adjustment from 100% to 50%

SETTING 1 SETTING 2 SETTING 3 VALUES COMMENTS
Display Mode Presentation
Bright
HDR SIM.
HLG SIM.
Cinema
Game
sRGB
DICOM SIM.
User
3D
Wall Color Off
Blackboard
Light Yellow
Light Green
Light Blue
Pink
Gray
Brightness -50 ~ 50
Contrast -50 ~ 50
Sharpness 1 ~ 15
Color -50 ~ 50 Gray out in RGB signal
Tint -50 ~ 50 Gray out in RGB signal
Gamma Film Film: for home theater and gamma curve like 2.2
Video Video: for video or TV source and gamma curve like 1.8
Graphics Graphics: for PC / Photo source and gamma curve like 1.0
Standard (2.2)
1.8
2.0
2.4
3D 3D Mode Off Gray out 3D – 2D, 3D Format and 3D Sync Invert while 3D Mode is Off
On Support auto 3D On and hide 3D Format while signal is HDMI 1.4a 3D
3D – 2D 3D
L Left Frame
R Right Frame
3D Format Auto
SBS Side by Side
Top and Bottom
Frame Sequential
3D Sync Invert Off Off / On
Aspect Ratio 4:3
16:9
16:10 Not supported in 1080p
LBX
Native Original image without any scaling
Auto
Edge Mask 0 ~ 10
Zoom -5 ~ 25
Image Shift H. -100 ~ 100
V. -100 ~ 100
Keystone Four Corners
H Keystone -30 ~ 30
V Keystone -30 ~ 30
Auto Keystone On Off / On
Reset D

Audio

SETTING 1 SETTING 2 SETTING 3 VALUES
Mute Off / On (ICON)
Volume 0 – 10

Setup

INFORMATION

Power Mode, Eco/Active – Eco disables LAN and puts USB in to standby mode, Active leaves LAN active and USB in to standby

SETTING 1 SETTING 2 SETTING 3 VALUES COMMENTS
Projection Front / Rear / Ceiling-Top / Rear-Top
Screen Type 16:9 / 16:10 Not supported in 1080p
Power Settings Direct Power On Off / On
Signal Power On Off / On
Auto Power Off (min.) 0 ~ 180 +/- 5 step adjustment
Power Mode (Standby) Eco. / Active
USB Power (Standby) Off / On (ICON) Gray out this while Power Mode (Standby) is Eco.
Security Security Off / On (ICON)
Security Timer Month 0 ~ 12
Day 0 ~ 30
Hour 0 ~ 24
Change Password
HDMI CEC HDMI CEC Off / On (ICON)
Test Pattern Green Grid / Magenta Grid / White Grid / White / Off
Options Language English English
Deutsch German
Français French
Italiano Italian
Español Spanish
Português Portuguese
Polski Polish
Nederlands Dutch
Svenska Swedish
Norsk/Dansk Norwegian/Danish
Suomi Finnish
ελληνικά Greek
繁體中文 Traditional Chinese
簡体中文 Simplified Chinese
日本語 Japanese
한국어 Korean
Русский Russian
Magyar Hungarian
Čeština Czechoslovak
عربي Arabic
ไทย Thai
Türkçe Turkish
فارسی Farsi
Tiếng Việt Vietnam
Bahasa Indonesia Indonesian
Română Romania
Slovenčina Slovakian
Options Closed Caption Off / CC1 / CC2 Hide this while input source is not VIDEO
Menu Settings Menu Location Top-Left (ICON)
Menu Location Top-Right (ICON)
Center (ICON)
Bottom-Left (ICON)
Bottom-Right (ICON)
Menu Timer Off
5 sec
10 sec
Options Auto Source Off / On (ICON)
Input Source HDMI 1
HDMI 2
VGA
VIDEO
High Altitude Off / On (ICON)
Logo Default / Neutral Default: customer logo / Neutral: same as below Background Color setting
Background Color Black (ICON)
Blue (ICON)
Red (ICON)
Green (ICON)
Gray (ICON)
Logo (ICON) Same as above Logo setting
Reset Reset to Default

Network

INFORMATION

Network information only applicable to Superior Series.

SETTING 1 SETTING 2 SETTING 3 VALUES COMMENTS
LAN Network Status Disconnect / Connected
MAC Address AA : BB : CC : DD : EE : FF
DHCP Off / On (ICON)
IP Address xxx.xxx.xxx.xxx 1. Gray out these while DHCP is On
2. When DHCP is Off, default IP configure setting:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.254
DNS: 192.168.0.51
Subnet Mask xxx.xxx.xxx.xxx 1. Gray out these while DHCP is On
2. When DHCP is Off, default IP configure setting:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.254
DNS: 192.168.0.51
Gateway xxx.xxx.xxx.xxx 1. Gray out these while DHCP is On
2. When DHCP is Off, default IP configure setting:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.254
DNS: 192.168.0.51
DNS xxx.xxx.xxx.xxx 1. Gray out these while DHCP is On
2. When DHCP is Off, default IP configure setting:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.254
DNS: 192.168.0.51
Reset Include LAN and Control
Control Crestron Off / On (ICON) Port 41794

Information

INFORMATION

The information menu provides information on the active source and other details of the projector, there are no adjuistable settings in this section of the menu.

SETTING 1 SETTING 2 SETTING 3 INFORMATION
Serial Number
Source
Resolution
Refresh Rate
Display Mode
Power Mode (Standby)
Light Source Hours
Network Status
IP Address
Brightness Mode
Firmware Version System
Firmware Version LAN
Firmware Version MCU

Need more help with this?
InFocus Support

Thanks for your feedback.