The following table provides solutions for potential issues that may occur when the projector is turned on or off.
|Projector will not turn on.||No power||Check that the power cable is connected. Check that the power indicator is on.|
|Projector will not turn on.||The projector has overheated||Make sure there is at least 30cm of clearance around the intake and exhaust vents. Wait five minutes and try turning the projector on again. If the projector is being used above 5500 ft/1600 m, use the On Screen Display (OSD) menu to set High Altitude to on.|
|Projector turns off by itself.||The Auto Power Off timer is set||Use the On Screen Display (OSD) menu to adjust the auto power of setting.|
Need more help with this?
Thanks for your feedback.