INFORMATION

Only available when when a LAN cable(RJ45) is connected to the display.

  • Enable the connection by selecting the Ethernet option to open the sub-menu.
  • Change the toggle switch on the right-hand side to switch on the connection. It will change to a green colour. (ethernet fig 1)
  • The display will automatically search for a network and provide an IP address to the display.

If the display is to be assigned a “fixed” IP address, disable the option for “Obtaining IP Address Automatically and populate the additional fields. This information should be obtained from your IT administrator.

Besoin d'aide supplémentaire avec ce sujet?
InFocus Support

Merci pour vos commentaires.