Only available when when a LAN cable(RJ45) is connected to the display.
- Enable the connection by selecting the Ethernet option to open the sub-menu.
- Change the toggle switch on the right-hand side to switch on the connection. It will change to a green colour. (ethernet ﬁg 1)
- The display will automatically search for a network and provide an IP address to the display.
If the display is to be assigned a “ﬁxed” IP address, disable the option for “Obtaining IP Address Automatically and populate the additional ﬁelds. This information should be obtained from your IT administrator.
¿Necesitas más ayuda?