1. Press the Power button on the keypad or remote control.
    The following message will appear: Power Off?
  1. Press the Power button again to confirm turning off your projector.
    If the Power button is not pressed a second time, the message will disappear after 10 seconds and the projector will not turn off.
    The cooling fans will operate for about 10 seconds and the Power LED will flash blue. When the Power LED changes to solid red, the projector has entered standby mode.
  1. Replace the lens cap.


If you want to turn the projector on again, wait 100 seconds.
Always allow the projector fan to turn off after you power down and before you unplug the projector power cable from the electrical outlet.

Need more help with this?
InFocus Support

Thanks for your feedback.