① HDMI 2 (1.4) – HDMI 1.4 for 3D support and input signals up to 4K at 30 frames per second
② SERVICE – connect a USB cable to update the projector’s firmware
③ HDMI 1 (2.0) – HDMI 2.0 with HDCP 2.2 for up to 4K input signals at 60 frames per second
④ DC 5V OUT – connect a USB cable for power out
⑤ VIDEO – connect a composite video cable for video output
⑥ VGA IN & VGA OUT- connect a VGA video cable for video input or output for monitor loop through
⑦ AUDIO IN & OUT – connect an AUX cable for audio input or output
⑧ POWER – connect the power cable to a mains wall outlet
⑨ LAN – connect to a network using an RJ45 cable (not available on the Core series)
⑩ RS232 – connect an RS232 cable to control the projector from a PC
⑪ Kensington Security Slot
INFORMATION
“INFORMATION“HDMI 2.0 with HDCP 2.2 is availaible on slected models.
Need more help with this?
InFocus Support