Display
INFORMATION
Zoom has a total of 30 step adjustment, each step representing 0.04x adjustment from -0.8 to 2.0x
Brightness Power, each step represents 5% power adjustment from 100% to 50%
SETTING 1 | SETTING 2 | SETTING 3 | VALUES | COMMENTS |
---|---|---|---|---|
Display Mode | – | – | Presentation | – |
– | – | Bright | – | |
– | – | HDR SIM. | – | |
– | – | HLG SIM. | – | |
– | – | Cinema | – | |
– | – | Game | – | |
– | – | sRGB | – | |
– | – | DICOM SIM. | – | |
– | – | User | – | |
– | – | 3D | – | |
Wall Color | – | – | Off | – |
– | – | Blackboard | – | |
– | – | Light Yellow | – | |
– | – | Light Green | – | |
– | – | Light Blue | – | |
– | – | Pink | – | |
– | – | Gray | – | |
Brightness | – | – | -50 ~ 50 | – |
Contrast | – | – | -50 ~ 50 | – |
Sharpness | – | – | 1 ~ 15 | – |
Color | – | – | -50 ~ 50 | Gray out in RGB signal |
Tint | – | – | -50 ~ 50 | Gray out in RGB signal |
Gamma | – | – | Film | Film: for home theater and gamma curve like 2.2 |
– | – | Video | Video: for video or TV source and gamma curve like 1.8 | |
– | – | Graphics | Graphics: for PC / Photo source and gamma curve like 1.0 | |
– | – | Standard (2.2) | – | |
– | – | 1.8 | – | |
– | – | 2.0 | – | |
– | – | 2.4 | – | |
3D | 3D Mode | – | Off | Gray out 3D – 2D, 3D Format and 3D Sync Invert while 3D Mode is Off |
– | On | Support auto 3D On and hide 3D Format while signal is HDMI 1.4a 3D | ||
3D – 2D | – | 3D | – | |
– | L | Left Frame | ||
– | R | Right Frame | ||
3D Format | – | Auto | – | |
– | SBS | Side by Side | ||
– | Top and Bottom | – | ||
– | Frame Sequential | – | ||
3D Sync Invert | Off | Off / On | – | |
Aspect Ratio | – | – | 4:3 | – |
– | – | 16:9 | – | |
– | – | 16:10 | Not supported in 1080p | |
– | – | LBX | – | |
– | – | Native | Original image without any scaling | |
– | – | Auto | – | |
Edge Mask | – | – | 0 ~ 10 | – |
Zoom | – | – | -5 ~ 25 | – |
Image Shift | H. | – | -100 ~ 100 | – |
V. | – | -100 ~ 100 | – | |
Keystone | Four Corners | – | – | – |
H Keystone | – | -30 ~ 30 | – | |
V Keystone | – | -30 ~ 30 | – | |
Auto Keystone | On | Off / On | – | |
Reset | – | D |
Audio
SETTING 1 | SETTING 2 | SETTING 3 | VALUES |
---|---|---|---|
Mute | – | – | Off / On (ICON) |
Volume | – | – | 0 – 10 |
Setup
INFORMATION
Power Mode, Eco/Active – Eco disables LAN and puts USB in to standby mode, Active leaves LAN active and USB in to standby
SETTING 1 | SETTING 2 | SETTING 3 | VALUES | COMMENTS |
---|---|---|---|---|
Projection | – | – | Front / Rear / Ceiling-Top / Rear-Top | – |
Screen Type | – | – | 16:9 / 16:10 | Not supported in 1080p |
Power Settings | Direct Power On | – | Off / On | – |
Signal Power On | – | Off / On | – | |
Auto Power Off (min.) | – | 0 ~ 180 | +/- 5 step adjustment | |
Power Mode (Standby) | – | Eco. / Active | – | |
USB Power (Standby) | – | Off / On (ICON) | Gray out this while Power Mode (Standby) is Eco. | |
Security | Security | – | Off / On (ICON) | – |
Security Timer | Month | 0 ~ 12 | – | |
Day | 0 ~ 30 | – | ||
Hour | 0 ~ 24 | – | ||
Change Password | – | – | ||
HDMI CEC | HDMI CEC | – | Off / On (ICON) | – |
Test Pattern | – | – | Green Grid / Magenta Grid / White Grid / White / Off | – |
Options | Language | English | English | |
– | Deutsch | German | ||
– | Français | French | ||
– | Italiano | Italian | ||
– | Español | Spanish | ||
– | Português | Portuguese | ||
– | Polski | Polish | ||
– | Nederlands | Dutch | ||
– | Svenska | Swedish | ||
– | Norsk/Dansk | Norwegian/Danish | ||
– | Suomi | Finnish | ||
– | ελληνικά | Greek | ||
– | 繁體中文 | Traditional Chinese | ||
– | 簡体中文 | Simplified Chinese | ||
– | 日本語 | Japanese | ||
– | 한국어 | Korean | ||
– | Русский | Russian | ||
– | Magyar | Hungarian | ||
– | Čeština | Czechoslovak | ||
– | عربي | Arabic | ||
– | ไทย | Thai | ||
– | Türkçe | Turkish | ||
– | فارسی | Farsi | ||
– | Tiếng Việt | Vietnam | ||
– | Bahasa Indonesia | Indonesian | ||
– | Română | Romania | ||
– | Slovenčina | Slovakian | ||
Options | Closed Caption | – | Off / CC1 / CC2 | Hide this while input source is not VIDEO |
Menu Settings | Menu Location | Top-Left (ICON) | – | |
Menu Location | Top-Right (ICON) | – | ||
Center (ICON) | – | |||
Bottom-Left (ICON) | – | |||
Bottom-Right (ICON) | – | |||
Menu Timer | Off | – | ||
5 sec | – | |||
10 sec | – | |||
Options | Auto Source | – | Off / On (ICON) | – |
Input Source | – | HDMI 1 | – | |
– | HDMI 2 | – | ||
– | VGA | – | ||
– | VIDEO | – | ||
High Altitude | – | Off / On (ICON) | – | |
Logo | – | Default / Neutral | Default: customer logo / Neutral: same as below Background Color setting | |
Background Color | – | Black (ICON) | – | |
– | Blue (ICON) | – | ||
– | Red (ICON) | – | ||
– | Green (ICON) | – | ||
– | Gray (ICON) | – | ||
– | Logo (ICON) | Same as above Logo setting | ||
Reset | Reset to Default | – | – | – |
Network
INFORMATION
Network information only applicable to Superior Series.
SETTING 1 | SETTING 2 | SETTING 3 | VALUES | COMMENTS |
---|---|---|---|---|
LAN | Network Status | – | Disconnect / Connected | – |
MAC Address | – | AA : BB : CC : DD : EE : FF | – | |
DHCP | – | Off / On (ICON) | – | |
IP Address | – | xxx.xxx.xxx.xxx | 1. Gray out these while DHCP is On 2. When DHCP is Off, default IP configure setting: IP Address: 192.168.0.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.0.254 DNS: 192.168.0.51 |
|
Subnet Mask | – | xxx.xxx.xxx.xxx | 1. Gray out these while DHCP is On 2. When DHCP is Off, default IP configure setting: IP Address: 192.168.0.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.0.254 DNS: 192.168.0.51 |
|
Gateway | – | xxx.xxx.xxx.xxx | 1. Gray out these while DHCP is On 2. When DHCP is Off, default IP configure setting: IP Address: 192.168.0.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.0.254 DNS: 192.168.0.51 |
|
DNS | – | xxx.xxx.xxx.xxx | 1. Gray out these while DHCP is On 2. When DHCP is Off, default IP configure setting: IP Address: 192.168.0.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.0.254 DNS: 192.168.0.51 |
|
Reset | – | – | Include LAN and Control | |
Control | Crestron | – | Off / On (ICON) | Port 41794 |
Information
INFORMATION
The information menu provides information on the active source and other details of the projector, there are no adjuistable settings in this section of the menu.
SETTING 1 | SETTING 2 | SETTING 3 | INFORMATION |
---|---|---|---|
Serial Number | – | – | – |
Source | – | – | – |
Resolution | – | – | – |
Refresh Rate | – | – | – |
Display Mode | – | – | – |
Power Mode (Standby) | – | – | – |
Light Source Hours | – | – | – |
Network Status | – | – | – |
IP Address | – | – | – |
Brightness Mode | – | – | – |
Firmware Version | System | – | – |
Firmware Version | LAN | – | – |
Firmware Version | MCU | – | – |
Need more help with this?
InFocus Support