The following table describes the LED indicator light colours and their meaning.

Power Blue solid Normal operation
Power Blue flashing The projector is warming up, shutting down, or cooling down. The remote control may be disabled while the indicator is flashing blue.
Power Red solid Standby mode
Power Off Off or Sleep mode
Laser Red flashing laser failure
Temperature Red flashing Fan failure
Temperature Red solid Over temperature

The projector will automatically shutdown if there is a laser failure, a fan failure or if the projector has overheated. Unplug the power cable from the projector, wait 30 seconds, and try again. If the warning indicators light up or flash, contact your nearest service center for assistance.

Need more help with this?
InFocus Support

Thanks for your feedback.