English
Español
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output)
Table of Contents
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output)
1.
ATevo – Single Phase – Group II
1.1.
5-Year Warranty
2.
Safety
2.1.
Key to Safety Symbols
2.2.
Equipment Misuse Examples
2.3.
DANGERS
2.4.
WARNINGS
2.5.
CAUTIONS
3.
Receiving & Mounting
3.1.
Storing & Receiving ATevo
3.2.
Unpacking & Inspecting ATevo
3.3.
Reporting Damages & Making Returns
3.4.
Moving ATevo
3.5.
Mounting ATevo
3.5.1.
Wall-Mounting (Style-5054)
3.5.2.
Floor-Mounting (Style-5054)
3.5.3.
Rack-Mounting (Style-5054)
3.5.4.
Floor-Mounting (Style-5070)
4.
Wiring
4.1.
Mechanical Diagram (30-50 Adc)
4.2.
Mechanical Diagram (75-100 Adc)
4.3.
Removing Protective Safety Shield
4.4.
Retapping Power Isolation Transformer
4.5.
Making AC Input Connections
4.6.
Making DC Output Connections
4.7.
Remote Voltage Sense
4.8.
Wiring ATevo Common Alarm
4.9.
Wiring Relays on Auxiliary I/O Board
4.10.
Wiring Temperature Compensation Probe
4.11.
Wiring Communications Adapters
5.
Controls & Navigation
5.1.
Front Panel Controls & Indicators
5.2.
Display
5.3.
Main Menu & Navigation
5.3.1.
Menu and Arrow Buttons
5.3.2.
EDIT/ENTER Button
5.3.3.
Navigation Conventions in this Manual
5.3.4.
Escape (ESC) Button
6.
Startup & Configuration
6.1.
Startup
6.1.1.
Understanding the Startup Sequence
6.1.2.
Factory Settings Tables
6.1.3.
Checking Installation
6.1.4.
Startup Procedure
6.1.5.
HOME Screen
6.2.
Configuring Basic Set Points & Alarms
6.3.
Configuring Advanced Set Points & Alarms
6.4.
Configuring System Settings
6.5.
Configuring Relays
6.6.
Disabling Alarms in Common Alarm List
6.7.
Configuring Communications Adapters
6.8.
Enabling/Disabling High Level Detect
7.
Basic Operation
7.1.
Modes & Methods
7.1.1.
Changing Display Mode
7.1.2.
Changing Charge Mode
7.1.3.
Changing Equalize Method
7.1.4.
Lamp Test & Display of Firmware Versions
7.1.5.
Resetting Latched Relays (legacy method)
7.2.
High Voltage Shutdown
7.3.
Low Level Detect
7.4.
High Level Detect
8.
Advanced Operation
8.1.
ATevo Main Menu
8.2.
Alarms Button
8.3.
Health Button
8.4.
Security & Passwords
8.4.1.
Access Security Features & Configure Passwords
8.4.2.
Setting Passwords
8.4.3.
Setting Default Access
8.4.4.
Logging into a Password Authorization Level
8.4.5.
Logging Out
8.5.
SD Memory Card Features – optional
8.5.1.
Installing SD Memory Card
8.5.2.
Copying Event Log File to SD Card
8.5.3.
Storing/Recalling Settings to/from Memory Card
8.5.4.
Upgrading Firmware via Memory Card (v2.6.6 & earlier)
8.5.5.
Upgrading Firmware via Memory Card (v2.7.0 onward)
9.
Alarms & Indicators
9.1.
Legacy Alarms & Indicators
9.2.
Common Alarm Indicator & Other Alarm Triggers
9.3.
Alarm LED Summary Table
9.4.
Viewing Alarms
9.5.
Advanced Alarms
9.6.
Resetting Latched Alarm Relays
9.7.
Battery Open Test
9.7.1.
Battery Open Test Settings
9.7.2.
Running Battery Open Tests
9.7.3.
Resetting Battery Open Alarm
10.
Hindle Health System
11.
Event Logs
11.1.
Viewing Event Log
11.2.
Viewing Hindle Health Log
11.3.
Clearing Event Logs
11.4.
Saving Event Logs
12.
Battery Temperature Compensation
12.1.
Installing the TempCo Option
12.2.
Using the TempCo Option
12.3.
Temperature Compensation Curves
13.
Remote Sense
13.1.
Remote Sense Connection
13.2.
Remote Sense Wiring Procedure
13.3.
Configuring Remote Sense Jumpers
13.4.
Disabling Remote Sense
14.
Auxiliary Inputs/Outputs
14.1.
Auxiliary Input/Output (I/O) Board
14.2.
Connections to Auxiliary I/O Board
14.2.1.
Wiring Relay Connections
14.2.2.
Wiring Binary Input Connections
14.2.3.
Wiring Analog Input Connections
14.3.
Hardware Configuration
14.4.
Software Configuration for Relays
14.5.
Software Configuration for Binary Inputs
14.6.
Software Configuration for Analog Inputs
15.
Forced Load Sharing
15.1.
FLS Introduction & System Requirements
15.2.
Forced Load Sharing Configuration
15.3.
Wiring ATevo Chargers for Forced Load Sharing
15.4.
Forced Load Sharing Operation
15.4.1.
Requirements to Maintain Forced Load Sharing
15.4.2.
Virtual Independent Mode
15.4.3.
Forced Load Sharing Alarms
15.5.
FLS in Combination with Other Charger Features
15.6.
Troubleshooting Forced Load Sharing ATevos
16.
Maintenance
16.1.
Performing Routine Maintenance
16.2.
Ordering Replacement Parts
16.3.
Replacing Defective Components
16.3.1.
Removing Safety Shield & Replacing Main Control Board
16.3.2.
Replacing Communications Adapter Boards
16.3.3.
Replacing Rectifier / Heat Sink Assembly or Power Board
16.3.4.
Replacing DC Power Supply
16.3.5.
Replacing Auxiliary I/O Board
16.3.6.
Replacing Filter Capacitor Board Assembly
16.3.7.
Replacing AC Surge Suppressor MOV Board
16.3.8.
Replacing Eliminator Filter Capacitor – optional
16.3.9.
Replacing Circuit Breakers
16.3.10.
Replacing Power Isolation Transformer
17.
Appendices & Drawings
17.1.
Appendix A – Specifications
17.2.
Appendix B – Standard Drawings
17.3.
Appendix C – Document Control Information
17.4.
Firmware v2.7.0 Enhancements
Download as PDF
1.
ATevo – Single Phase – Group II
1.1.
5-Year Warranty
Complete your
5-year warranty
Last modified:
20 May 2021
1.1.
5-Year Warranty
