With the command “High/Low point” you can very easily measure and determine the high and low point of surfaces, such as stair tread heights.
You find the command under the “Measurement” tab in the submenu under “Distance point to plane”, or on the Flexijet screen.
Typically, you could measure about 4-6 points on each stair tread. Press the ‘Cancel’ on the Flexijet, or “Esc” to end the measurement series and stay in the High-Low function, starting a new series of points. With a second “Esc”, you end the command. Then, only the highest and lowest measuring point of each tread will be displayed.
Post your comment on this topic.