Cintoo Cloud streams high-resolution 3D meshes from each scan position in a WebGL-compatible browser and you can move from scan to scan by clicking on the scan locations displayed with an icon. VR Streaming is all about the same workflow: high resolution 3D meshes are streamed in a WebGL browser that is WebVR compatible, which will generate the 2 stereoscopic viewpoints that can been displayed via the VR app into the VR display device.

Added Value of Cintoo’s Technology for Virtual Reality

  • Highest possible resolution for the 3D mesh, coming from terrestrial laser scanners
  • Fast streaming of the 3D mesh from each scanning positions
  • Display modes: RGB, Surfaces, XRay
  • Streaming of the mixed scan data + BIM content with possibility to display them separately or together
  • Cloud-based or private-server-based solution for collaborative experiences

Recommended Configuration to run Cintoo’s VR Streaming feature

Supported VR Devices

  • Oculus Rift or Rift S with 2 touch controllers
  • HTC Vive Pro with 2 controllers

Required Web browser

  • Mozilla Firefox

Required software

  • Oculus desktop app. if you use an Oculus device
  • VR Steam desktop app. if you use an HTC device

VR-ready laptop or desktop

  • Equipped with a ‘good’ graphic board (such as NVIDIA GeForce GTX 1060 or better, or the equivalent from AMD)
  • HTC Vive provides detailed information about VR-Ready devices here: https://www.vive.com/us/ready/#
  • You can also test your PC in this page by clicking on ‘Test my PC’.

Please follow these instructions to make your Cintoo’s VR streaming work within Mozilla Firefox:

  • If you are using a laptop with dual CPU (one NVidia graphics card and one Intel card), in the NVIDIA Control Panel, set your web browser(s) to use the high-performance NVIDIA processor:

Please follow these instructions to make your Cintoo’s VR streaming work with Oculus devices:

Please follow these instructions to make your Cintoo’s VR streaming work with an HTC Vive device:

Running the VR Streaming experience:

  • Login to Cintoo Cloud using Mozilla Firefox.
  • Launch Oculus or HTC Vive Application
  • Select the project that you want to experience in VR.
  • In the 3D View, click in the bottom right on: ===============>
  • Simply click on the VR mask at the bottom right of the Window.
  • This will start the VR app and display the content in the VR headset.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment