Diverse information can be read out after the INFO button has been pressed 3 times in one second. After 1 minute the device goes back into sleep mode; the display is blank again. (The date format is dd/mm/yyyy.)
1st display: | all segments activated | |
2nd display: | date and time of production test results | |
3rd display: | start delay time | |
4th display: | current date, time and ambient temperature | |
5th display: | temperature, time limits and ALARM type S: single event HI: high limit Time: h 01 00 MIN Explanation: Alarm occurs if the limit of 44.9°C is exceeded for 1 hour continuously. |
|
6th display: * | temperature, time limits and ALARM type C: cumulative event HI: high limit Time: h 10 00 MIN Explanation: Alarm occurs if the limit of 29.9°C is exceeded 10 hours in total (sum of Hi Range violation). |
|
7th display: * | temperature, time limits and ALARM type S: single event LO: low limit –0.4°C Time: h 01 00 MIN Explanation: Alarm occurs if the limit of –0.4°C is undercut by 1 hour continuously. |
|
8th display: * | temperature, time limits and ALARM type C: cumulative event LO: low limit –0.4°C Time: h 01 40 MIN Explanation: Alarm occurs if the limit of –1.4°C is undercut by 1 h 40 min. (sum of LO range violation). |
|
9th display: * | temperature, time limits and ALARM type S: single event HI: high limit Time: h 00 01 MIN Explanation: Alarm occurs if the limit of 8.9°C exceeds 1 minute continuously. |
|
10th display: | time expiry (max. running time in days) Explanation: TIME EXP appears on the display after 20 days of operation. |
*(only indicated if factory-preset, otherwise skipped)