Connect (pair) KDC 200 or 200i scanner to your smartphone

  1. If your scanner connects to a phone currently, turn off the Bluetooth on your phone, so there is no connection to the scanner. This is needed in order to perform factory reset on your scanner.
  2. Download and print out this document
  3. Turn on the scanner
  4. Scan barcode labeled as “a.” Wait for 10 seconds. Then scan barcode labeled as “b” and “c.”
  5. Scan barcode labeled as “4” according to your phone type. If you have an Android phone, scan the first barcode. If you have an iPhone, scan the second barcode.
  6. Scan barcode labled as “Pairing”
  7. Scan barcode labeled as “Beeper Sound OFF” to disable the beep.
  8. Go to your phone -> Settings -> Bluetooth
  9. Turn on bluetooth and search for the scanner.

Here is a video to demonstrate how to pair with an Android phone.

Full setup document is here. We recommend you use HID mode (page 2) to connect scanner to your phone.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
If you have any questions this tutorial doesn't answer, please contact us here!

Post Comment